Best Selling

Mount any additional echoMAP or GPSMAP on your boat with this second mounting station. Also includes a wiring harness to power your compatible device and connect to an optional NMEA 0183 network.

Mount any additional chartplotter on your boat with this second mounting station. Also includes a wiring harness to power your compatible device and connect to an optional NMEA 0183 network, CANet device and transducer. .

Use this 6 foot power/data cable to power your compatible ECHOMAP. Includes NMEA 0183 inputs/outputs. Compatible models include : ECHOMAP™ 45dv / 55dv / 75sv / 95sv.

Power your compatible ECHOMAP Ultra chartplotter/sounder combo with this 6 foot (2 metre) power/data cable. Includes NMEA 0183 input/output.

Connect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapter cable.

Easily collect speed data and send it to your echo™ fishfinder with this transom mount water speed sensor.

This transducer adapter allows you to use your existing 6-pin dual-beam transducer with your 4-pin echo™ series fishfinder. .

Freshwater Transducer for use w/echo Fishfinder Series.

Power and connect your compatible GPSMAP device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.

Garmin Xdcr Extension Cable 8 Pin.

Garmin 6Pin Female to 8Pin Male Adapter.

This kit includes 1 micro cable and 1 mini cable, so you can charge or power your compatible devices. Plug the appropriate cable into your device, then attach the AC outlet adapter for power or connect to a personal computer for data transfer. Includes adapters for the U.K. and Europe.

Actuator Power Cable Replacement for GHP 12  Autopilot System

This entry level CHIRP solution provides good depth capability and target separation.

This entry level CHIRP solution provides good depth capability and target separation. This 8-pin 300 W bronze thru-hull mount transducer has a depth of 1,500 ft; an operating frequency of 95-155 kHz; a beamwidth of 26/17 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies. An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 1,200 ft; an operating frequency of 130-210 kHz; a beamwidth of 9-15 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition. It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 14x23 to 3x5 degrees; and a 0 to 26 degree deadrise.

This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. *Do not use on metal hulls.

Garmin 010-11634-22 Airmar B75H Bronze Thru-Hull Transducer with Garmin 8 Pin Connector 20° Tilted version for 16°-24° deadrise Our bronze thru-hull mount transducer is designed to allow both traditional and spread spectrum scanning when used with a compatible sonar. A 600 W transducer with 8 pins, it has a depth of 800 ft; an operating frequency of 130-210 kHz; a beamwidth of 15/9 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat

This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls.

This plastic transom mount provides depth, speed and temperature in 1 package.

Depth: 800 - 1,200 ft. Operating frequency: 50 - 200 KHz. Beamwidth: 45 - 12 degrees. Deadrise: 0 - 22 degree. Not recommended for cored hulls.

This plastic thru-hull mount transducer uses the low frequencies for deep water performance and high wide frequencies for shallow water performance.

Garmin 010-11868-20 Airmar SS60 600W 50/200 Thru-Hull Transducer With Garmin 8 Pin Connector 0° Tilt Version for 0-7° deadrise This stainless steel 600 W 8-pin transducer provides a vertical beam without a fairing and is excellent for fiberglass and wood hulls. It has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45/12 degrees; and 0 to 7 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.