Inflatable Boat Accessories

Tear Aid Emergency Hypalon Repair Kit sold in three sizes: 37cm x 15cm, 75cm x 15cm & 150cm x 15cm

PVC Single Part Glue 50ml 100ml

High Quality 300L/Min at 60 strokes/minute capacity hand pump, which can be transformed into a single action pump by removing a small plug.

A4, A5, A7, B7, C7 & D7 3/4" Inflate Adaptor 21mm ODFits Hoses with 21mm ID part nos 502207 & 502235

A7/B7/C7 & D7 Pressure Gauge and AdaptorPressure reading up to 1 bar 15psi

A7/B7/C7 & D7 Rugged Pressure Gauge and AdaptorAvon part nos V00323 Pressure reading to 0.6 bar 8.5psi 

Avon Stepped Inflate Adaptor V02598Fits valves:500112-3 (A7),500114-5 (B7), 500116 500117 (C7), 500134-7 (D7) 500118 (Zodiac Delrin)Fits Hoses with 21mm ID part nos 502207 502235Hasa bar across inside which depresses the valve diaphragm, thus allowing easier air flow into the inflation chamberAvon Part number V02598

Bravo SUP-3 Double Action Pump New DOUBLE ACTION hand pump for inflatable SUP board. It can be used in double-action mode during the first phase of the inflation, when the pressure required is not high. The pump can be manually switched to single-action mode during the last phase of the inflation, when the pressure required is high, by simply removing the red clip valve. Supplied with built in pressure gauge 29PSI

3 Piece Inflate Adaptor Set 21mm OD for Bravo 1, 2, 7, 7M, 8, 8M, 9 & 10Fits Hose with 21mm ID part nos 502207 & 502235

Bravo GE 20-2 Batt Electric Pump inc rechargeable battery. Wide pressure range selectable by easy of use dial indicator with automatic shut-off LED indicators for diagnostics Integrated 12V DC battery, rechargeable through alligator clips via 12V Battery or with the standard 110-240 AC/DC adaptor Equipped with alligator clips for direct connection to external 12V batteries Rubber base for maximum stability Inflate only Protective filtration system Inflation fittings available for most common valves Carry Bag included Flow rate: 125 l/min Max Pressure:1,5 bar (22.0 PSI) Amp Draw: 9A max Power:12V DC via alligator clips from external 12V battery Dimensions in bag: 220 x 320 x 220 mm Weight: 3,5 kg Suitable for: BOATS, SUP, KITES, KAYAKS, ALL KIND OF INFLATABLES See instruction video below: https://youtu.be/LSSMQP67Ows

The Bravo GE BP-1 is a lightweight 12 V inflator suitable for SUP Boards, Inflatables with High Pressure Air Deck Floors Ribs up to 3.00 metres. It has a maximum pressure of 18.0 psi with a piston flow rate of 160 l/min a consumption of 9 amp max Comes with a Bayonet Adaptor glued into hose, which fits most Semi Recessed Valves as used in SUP's Inflatable Boats See related products below for Hose Fittings to allow Pump to be used on all Inflatable Boats, Ribs Inflatable Products. See instructions video below: https://youtu.be/3pXk7cce1Pw

Bravo GE BTP12M electric inflator - easy to use - reliable and powerful. Maximum pressure of 0.95bar (13.8 psi), which is enough to inflate all types of Inflatables including high pressure air floor Inflatables and Ribs up to 4.00 metres on the market today. Pressure selection facilitated with this special manometer. Reading scale in bar and PSI. Voltage 12 V DC Turbine flow rate 450 l/min Piston flow rate 160 l/min Consumption 20 A max Automatic stop when selected pressure is reached. Fitted with aspiration air filter which is easily accessible for cleaning and replacement. Complete with connectors for dinghies and kites. Complete with shoulder bag. Supplied with 1.70 m tube and 3 m power cord. Can inflate and deflate. 21mm ID Hose Sizes: 29cm x 11cm x 13cm Weight: 2.5KG See related products below for Inflate adaptors etc If you have a Halkey Roberts Style Valve and want a Bayonet Style Adaptor, purchase part number 502233, this fits onto the end adaptor on the supplied hose. See instructions video below: https://youtu.be/hpgT4Jht3D4

Bravo GM 4 XS Hand Pump New Hand Pump with Foldable Handle Base to reduce height width for packing Built in Pressure gauge Max Pressure 29 PSI (2.0 Bar) Double/Single action switch Supplied with adaptors for the most common valves Sizes: 15cm x 11cm x 45cm

Bravo GP 10 Twin chamber foot bellows. High quality, double action foot bellows with hose, fittings and pressure gauge. Inner chamber can inflate up to 5-6 PSI, suitable for air deck boats.Inflate and deflate capability. 21mm ID Hose Capacity 5.5 Lite Max Pressure 11.6 PSI Click on accessories tab for list of suitable inflate adaptors

Hose end adaptors for Bravo BP/BTP Electric pumps Hose has a 21mm ID Hose length is 1.70m

Bravo Inflate Adaptor 21mmBayonet type Bravo Inflate adaptor 21mm as used on the following Bravo pumps:Bravo GE 20-1Bravo GE 21Bravo BST 800Bravo BST 800 BATTFits valves: 500119 & 500132 (Zodiac Semi Recessed), 500126 ( Bravo 2005), 500128 ( Waveline XS Eco), 500129 (Quicksilver/Waveline 8 section), & 809887 ( Halkey Roberts) Supplied with three washers, these are easily removeable to allow different depth settings for different valves.Manufactured by Bravo

Bravo Turbo Max inc Console Kit 24V consists of: Turbo Max Air Station Console Mount Inflator 24V inc DC Driver It is a large capacity 24V inflator which can inflate a 7M Rib in approx 7 minutes and has a capacity of 1000L/min max pressure is 3.6psi. Pressure can be regulated up to 3.6psi with automatic shut off, equipped with two powerful motors mounted on an aluminium plate to disperse heat. Screws Bracket Inflation Adaptors Power Cable 0.5M long with a 100 Amp Connector Hose is not included, so Turbo Max Console Kit Hose Fittings is required part nos 502244 ( this come with all connectors 2.8M hose), if just a longer length of hose is required order part nos 502236 which is sold by the metre, also available waterproof deck mounted hatch locker with clear hatch part nos 502242 ( so inflator can be installed inside to protect from spray dirt) Click on related products below to view Hose Fittings, Hose, Watertight Box,Inflate Aadaptors( will require hose to be cut to fit hose reducer)

With the double chamber pump 90004, inflation to the recommended pressure of all fabric or rubberized boats, can easily be achieved with very limited effort.

Halkey Roberts, Quicksilver, Honda, Wetline, Zodiac inflate adaptor 21mm OD Fits Hoses with 21mm ID part nos 502207 502235

Hose Pump Adaptor SP46 Bravo 1, 2, 8M, 9 and 10 21mm OD 

Hose -Pump Fitting 25mm for Bravo 2000/Bravo 2000ARS/OV6/OV10/GE900/GE900ARS Fitting to connect a 25mm Hose to Bravo 2000/Bravo 2000ARS/OV6/OV10/GE900/GE900ARS Pumps

Pressure Gauge & 7 Spider AdaptorPressure reading up to 1 bar 15psiSupplied with a 7 Spider Adaptor which fits most of the popularvalves on the market

Pressure Gauge for Bravo  SUP HP Hand PumpPressure reading up to 2 bar (29 psi)   

Seago High Pressure SUP Pump A neat pump that will handle the high pressures required for SUPs (20+ Psi), but will equally inflate inflatable kayaks and other toys. A pressure gauge allows for accurate pressure measurement. This pump is fitted with a bayonet style connector which is common to alomost all inflatable paddle boards. Key Features Pressure Guage Max 20Psi Baynet style...