Busbars & Circuit Protection: Page 6

The Automatic Charging Relay Plus - Dual Battery - 160 Amp includes: - Ultra-Low Power Draw Compare to typical ACRs (7-10 mA) vs 7610 ACR @ 1.3 mA, will not deplete batteries even after extended electrical system downtime. - Simple & Robust Installation: Integrated sealed plug eliminates corrosion, includes Deutsch/Amphenol DTM connector harness - Start Assist input option to ensure maximum cranking amps available by allowing manually connecting of batteries via remote switch. - Bullet-proof Construction: Sealed unit, stainless steel hardware, high temperature materials allow mounting anywhere. Integrated thermal overload shutdown protection. - Additional Low Amp Output can be used to report device status remotely, or drive a secondary relay for charge to a battery bank without a charge source (see example)

The Automatic Charging Relay Plus - Triple Battery - 2x 80 Amp includes: - Ultra-Low Power Draw Compare to typical ACRs (7-10 mA) vs 7610 ACR @ 1.3 mA, will not deplete batteries even after extended electrical system downtime. - Optional Under-Voltage Lock-Out provides ability to prevent either ACR from connecting a good battery under charge with a battery that has a shorted cell, ensuring a single battery or bank will not deplete the other system batteries. - Start/Engine Isolation and Start Assist functions are optional for each relay; allowing protection of sensitive electronics from engine starting events or the option to boost cranking effectiveness. - Adjustable Off-Voltage for Auxiliary Battery Priority provides ability to share start battery energy for auxiliary without risking engine starting ability. - Additional Low Amp Output can be used to report device status remotely, or drive a secondary relay for charge to a battery bank without a charge source

The Busbar, Offset, 3/16", Copper, Tin Plated reduce installation space via robust bus bar that closely connects TH series relays to CT series fuse blocks.

The Contactor, 100A, 12V includes: - Ignition Protection safe for installation in closed compartments with potential explosive gases - High Electrical Switching Endurance delivers 6,000 cycles at 100A / 350V, 100,000 cycles at 100A / 14V - High Interrupt Current Capability safely able to open in a locked starter situation (up to 1,250 A @ 14 Vdc) - Bullet-proof Construction: Sealed device, high temp materials for engine compartment applications, and stainless self-locking hardware.

The Contactor, 100A, 24V includes: - Ignition Protection safe for installation in closed compartments with potential explosive gases - High Electrical Switching Endurance delivers 6,000 cycles at 100A / 350V, 100,000 cycles at 100A / 14V - High Interrupt Current Capability safely able to open in a locked starter situation (up to 1,250 A @ 14 Vdc) - Bullet-proof Construction: Sealed device, high temp materials for engine compartment applications, and stainless self-locking hardware.

The Contactor, 250A, 12/24 V includes: - Ignition Protection safe for installation in closed compartments with potential explosive gases - High Electrical Switching Endurance delivers 6,000 cycles at 100A / 350V, 100,000 cycles at 100A / 14V - High Interrupt Current Capability safely able to open in a locked starter situation (up to 1,250 A @ 14 Vdc) - Bullet-proof Construction: Sealed device, high temp materials for engine compartment applications, and stainless self-locking hardware.

The Dual Battery Charge Manager (TDR+ACR) includes: - One Product Handles Two Functions for both auxiliary battery charge management and timed load shedding for add-on circuits. - Prevents add-on equipment from draining batteries / maximizes and extends operational readiness. - Protects sensitive on-board electronics via optional under/over voltage shutdown and start event isolation.

The ATOF - 15 Amp fuses include many different features, including: - Color coding which indicates amperage rating - See-through housings make it easier to see when fuses blow - Simple to install and remove - Checkpoints on top make it possible to measure resistance without removing the fuse

The ATOF - 25 Amp fuses include many different features, including: - Color coding which indicates amperage rating - See-through housings make it easier to see when fuses blow - Simple to install and remove - Checkpoints on top make it possible to measure resistance without removing the fuse

The ATOF - 5 Amp fuses include many different features, including: - Color coding which indicates amperage rating - See-through housings make it easier to see when fuses blow - Simple to install and remove - Checkpoints on top make it possible to measure resistance without removing the fuse

The Fuse, LP J Case 25 A helps provide both increased time delay and low voltage drop to protect high current circuits and handle inrush currents.

The Fuse, LP J Case 40 A helps provide both increased time delay and low voltage drop to protect high current circuits and handle inrush currents.

The Fuse, LP J Case 60 A helps provide both increased time delay and low voltage drop to protect high current circuits and handle inrush currents.

The Harness for 8+2 Fuse Block, 14 AWG, 10ft #1 to 4 features include: - Sealed connector ensures reliable electrical connections. - Convenient Control Harness for TH series relays combines ignition signal 1, ignition signal 2, control ground and LED output for remote monitoring of device status. - Connects seamlessly to 92-5015 CT Series 8+2 Fuse Block for low-amp circuits protects wire connections from moisture/corrosion and offers simple plug-in installation.

The Harness for 8+2 Fuse Block, 14 AWG, 20ft #1 to 4 features include: - Sealed connector ensures reliable electrical connections. - Convenient Control Harness for TH series relays combines ignition signal 1, ignition signal 2, control ground and LED output for remote monitoring of device status. - Connects seamlessly to 92-5015 CT Series 8+2 Fuse Block for low-amp circuits protects wire connections from moisture/corrosion and offers simple plug-in installation.

The Harness for 8+2 Fuse Block, 14 AWG, 5ft #1 to 4 features include: - Sealed connector ensures reliable electrical connections. - Convenient Control Harness for TH series relays combines ignition signal 1, ignition signal 2, control ground and LED output for remote monitoring of device status. - Connects seamlessly to 92-5015 CT Series 8+2 Fuse Block for low-amp circuits protects wire connections from moisture/corrosion and offers simple plug-in installation.

An insulator, Stub Cable Cap for Ring Terminal Fuse Blocks. 0.55 diameter.

The Kill Switch for TH & TDR Series Time Delay Relays Protects Batteries from long-term storage drain by eliminating off-state current draw. It also includes: - Simple & Robust Installation: Pre-terminated wiring for plug & play connection to TH Series MX-150 control connector ensures load side of switch connection is fully environmentally sealed. - Compact Solution surface mounts vertically or horizontally to maximize installation flexibility. Panel mount installation hardware also included. - Robust Construction: Carbon fiber reinforced housing, heavy action toggle, tin plated wires.

The PDM 14 Circuit + Ground w/Kill Switch features include: - Compact Solution Combines Intelligent Battery Protection, Power Switching, Circuit Protection and Ground Return - Reduce Install Space and Total Installed Cost, 4 Separate Functions in One Product - 3 High-Amp (1-45A) Outputs Increase Ability to Protect All Circuits with One Solution - Three Fuse Groups Can be Independently Set to 24/7, Ignition Switched, or Time Delay

The Relay 12V 150 Amp, includes: - Automotive rated relay, Industry standard drop-in replacement to Tyco/Amp. - Delphi Metripak connector built-in to enclosure. Sealed enclosure. - Switches/Carries high-amp electrical currents at high ambient temperatures and wet environments.

The Relay, 160 Amp / 12V, w/DT/AT Connector includes: - Simple & Robust Installation: Sealed MX-150 plug/harness with 2 ft control wires included. Reduces install time/costs. Optional output bus bar provides simple and compact connection to RT or CT fuse block product families. - Optional Deutsch DT/AT Connector Output supports an industry standard for marine and commercial vehicle. See P/N: 92-7421D for details. - Bullet-proof Construction: Sealed unit, high temperature materials allow mounting anywhere on vehicle. Stainless steel self-locking hardware - Integral Diode Suppression reduces voltage spikes on control lines during switching

The Relay, 160 Amp / 24V, w/DT/AT Connector includes: - Simple & Robust Installation: Sealed MX-150 plug/harness with 2 ft control wires included. Reduces install time/costs. Optional output bus bar provides simple and compact connection to RT or CT fuse block product families. - Optional Deutsch DT/AT Connector Output supports an industry standard for marine and commercial vehicle. See P/N: 92-7421D for details. - Bullet-proof Construction: Sealed unit, high temperature materials allow mounting anywhere on vehicle. Stainless steel self-locking hardware - Integral Diode Suppression reduces voltage spikes on control lines during switching

The Relay, 2x80 Amp / 12V includes: - Simple & Robust Installation: Sealed MX-150 plug/harness with 2 ft control wires included. Reduces install time/costs. Optional output bus bar provides simple and compact connection to RT or CT fuse block product families. - Optional Deutsch DT/AT Connector Output supports an industry standard for marine and commercial vehicle. See P/N: 92-7421D for details. - Bullet-proof Construction: Sealed unit, high temperature materials allow mounting anywhere on vehicle. Stainless steel self-locking hardware - Integral Diode Suppression reduces voltage spikes on control lines during switching

The Relay, 2x80 Amp / 24V, w/DT/AT Connector includes: - Simple & Robust Installation: Sealed MX-150 plug/harness with 2 ft control wires included. Reduces install time/costs. Optional output bus bar provides simple and compact connection to RT or CT fuse block product families. - Optional Deutsch DT/AT Connector Output supports an industry standard for marine and commercial vehicle. See P/N: 92-7421D for details. - Bullet-proof Construction: Sealed unit, high temperature materials allow mounting anywhere on vehicle. Stainless steel self-locking hardware - Integral Diode Suppression reduces voltage spikes on control lines during switching