Busbars & Circuit Protection: Page 8

The XD Flex 2 - Remote Battery Switch/ACR w/Knob features include: - Compact 35-75% smaller installation footprint. - Eliminates dead start batteries by sharing charging on either of two batteries and isolating batteries when no charge sources are present. - Supports single/multiple engine installations with dual start/engine isolation inputs.

The 10A RCBO Within Waterproof Enclosure is ideal for adding RCBO (Earth leakage & Over Current Protection combined) to simple shorepower systems or inverter outputs.

The 25A Gen/Shore Changeover, similar to the inverter/shore changeover units, automatically switches between two sources of AC power (usally shore and inverter), but also includes a timer. When the generator is started, the unit will not switch to generator power until the preset time has elapsed. This allows the generator to start, lubricate and warm up before load is applied, reducing generator wear and extending its life. The timer may be set between 1 second and 60 minutes.

The 25A RCBO in box is ideal for adding RCBO (Earth leakage & Over Current Protection combined) to simple shorepower systems or inverter outputs.

The 32A RCBO in box is ideal for adding RCBO (Earth leakage & Over Current Protection combined) to simple shorepower systems or inverter outputs.

The 63A Gen/Shore Changeover, similar to the inverter/shore changeover units, automatically switches between two sources of AC power (usally shore and inverter), but also includes a timer. When the generator is started, the unit will not switch to generator power until the preset time has elapsed. This allows the generator to start, lubricate and warm up before load is applied, reducing generator wear and extending its life. The timer may be set between 1 second and 60 minutes.

The 63A RCD in box is ideal for adding RCD (Earth leakage Protection only) to simple shorepower systems or inverter outputs.

The Combi Inv/Chrgr & Gen Unit is designed for larger AC installations with a Combi Inverter/Charger, shorepower and an onboard generator. Shorepower and Generator power is fed to dedicated RCDs and then through an automatic changeover switch. A timer is provided to delay generator switch over (and allow generator to warm up before load is applied).

The RCD +2 MCD Consumer Unit is designed for those adding shorepower to a vehicle or boat. The Consumer unit conatins 30mA RCD for earth leakage protection and 2 independent single pole breakers for circuits such as ring main, water heater, battery charger and fridge.

The 12V Battery Protect Relay 500A is a smart high-current magnetic latching contactor, that can handle continuous DC currents of up to 500Amps. The contactor can easily be installed in an engine room or battery compartment while being controlled from a more convenient location by a small panel-mounted switch.

In a boat or vehicle with two battery banks, it is useful to be able to charge both banks while underway. The Automatic Charging Relay allows two battery banks to be charged from a single source, such as an alternator, but keep batteries isolated when not charging. This is to avoid that one battery bank discharges the other. Additionally, if one battery bank becomes depleted anyway, there will be a charged bank available for emergency starting.

The DCM 1xM8 Single Stud (50V) (Set of 2pcs) is used to extend cables, add power taps or form termination end-points. The solid and compact design, as well as the possibility to link these up with other DC Modular family members, make these products the best choice for all professional DC power systems.

The DCM 2xM8 Dual Stud (50V) is used to extend cables, add power taps or form termination end-points. The solid and compact design, as well as the possibility to link these up with other DC Modular family members, make these products the best choice for all professional DC power systems.

The DCM 3xM8 Busbar (50V/600A) is used to distribute high DC currents to a number of connected cables, or other DC Modular family members. The solid and compact design, as well as the possibility to link up multiple busbars on a fixed grid, make these products the best choice for all professional DC power systems. The high current busbars are available with M8 or M10 stud sizes.

The DCM 5xM8 Busbar (50V/600A) is used to distribute high DC currents to a number of connected cables, or other DC Modular family members. The solid and compact design, as well as the possibility to link up multiple busbars on a fixed grid, make these products the best choice for all professional DC power systems. The high current busbars are available with M8 or M10 stud sizes.

The solid and compact design, as well as the possibility to link up multiple fuseholders on a fixed grid, make the DCM ANL Fuseholder (50V/35..300A) (for M10 fuse) one of the best choices for all professional DC power systems. It's features include: - Stainless steel studs, nuts and washers for optimal corrosion resistance - Tin plated high purity copper busses provide maximum conductivity, reducing heat and improving efficiency - Special fiber reinforced base material offers excellent high temperature properties, good chemical resistance and high strength - Unique grid optimized footprints allow space saving arrangements of multiple products - Common interconnection heights for easy combining of multiple products using link plates (except Mega and ANL (300A) fuseholders) - Robust transparent covers with breakouts to allow wire access from any direction - Smart terminal design allows dual mirrored cable lug connections - Easy in-system connection access due to top locked covers (except Mega and ANL (300A) fuseholders)

The solid and compact design, as well as the possibility to link up multiple fuseholders on a fixed grid, make the DCM ANL Fuseholder (50V/35..600A) (for M10 fuse) one of the best choices for all professional DC power systems. It's features include: - Stainless steel studs, nuts and washers for optimal corrosion resistance - Tin plated high purity copper busses provide maximum conductivity, reducing heat and improving efficiency - Special fiber reinforced base material offers excellent high temperature properties, good chemical resistance and high strength - Unique grid optimized footprints allow space saving arrangements of multiple products - Common interconnection heights for easy combining of multiple products using link plates (except Mega and ANL (300A) fuseholders) - Robust transparent covers with breakouts to allow wire access from any direction - Smart terminal design allows dual mirrored cable lug connections - Easy in-system connection access due to top locked covers (except Mega and ANL (300A) fuseholders)

The solid and compact design, as well as the possibility to link up multiple fuseholders on a fixed grid, make the DCM Class-T Fuseholder (50V/225..400A) one of the best choices for all professional DC power systems. It's features include: - Stainless steel studs, nuts and washers for optimal corrosion resistance - Tin plated high purity copper busses provide maximum conductivity, reducing heat and improving efficiency - Special fiber reinforced base material offers excellent high temperature properties, good chemical resistance and high strength - Unique grid optimized footprints allow space saving arrangements of multiple products - Common interconnection heights for easy combining of multiple products using link plates (except Mega and ANL (300A) fuseholders) - Robust transparent covers with breakouts to allow wire access from any direction - Smart terminal design allows dual mirrored cable lug connections - Easy in-system connection access due to top locked covers (except Mega and ANL (300A) fuseholders)

Due to the common interconnection heights, smart space saving arrangements of multiple DC Modular products can be made by linking these together using the DCM Link Plate 3 Way (50mm pitch). The plate is compatible with M8 and M10 studs. Additionally, it is equipped with three M4 screws to provide convenient connection points for smaller cables.

Due to the common interconnection heights, smart space saving arrangements of multiple DC Modular products can be made by linking these together using the DCM Link Plate (50mm pitch). The plate is compatible with M8 and M10 studs. Additionally, it is equipped with two M4 screws to provide convenient connection points for smaller cables.

The solid and compact design, as well as the possibility to link up multiple fuseholders on a fixed grid, make the DCM Mega Fuseholder (60V/40..500A) one of the best choices for all professional DC power systems. It's features include: - Stainless steel studs, nuts and washers for optimal corrosion resistance - Tin plated high purity copper busses provide maximum conductivity, reducing heat and improving efficiency - Special fiber reinforced base material offers excellent high temperature properties, good chemical resistance and high strength - Unique grid optimized footprints allow space saving arrangements of multiple products - Common interconnection heights for easy combining of multiple products using link plates (except Mega and ANL (300A) fuseholders) - Robust transparent covers with breakouts to allow wire access from any direction - Smart terminal design allows dual mirrored cable lug connections - Easy in-system connection access due to top locked covers (except Mega and ANL (300A) fuseholders)

The DCM Remote Battery Switch (24V/500A) is a smart high-current magnetic latching contactor, that can handle continuous DC currents of up to 500Amps. The contactor can easily be installed in an engine room or battery compartment while being controlled from a more convenient location by a small panel-mounted switch.

The Qlink to USB Communication Kit enables user to control, readout and configure the Expert Modular battery monitor from your windows PC, running the new Dashboard 2 software.