Electronics: Page 17

Be ready for anything. Engineered for reliability the em-trak SART100 is a IMO-SOLAS certified AIS search and rescue transponder. This market-leading search and rescue transponder can be stored for years, and when needed, can be instantly activated to transmit an emergency transmission to all AIS equipped vessels including coastguard and aircraft, allowing them to pinpoint your exact location. The...

Increase your situational awareness and confidence on the water with the Garmin AIS 800 transceiver. It has 5 watts of transmit power and provides faster position reporting than ever before. It transmits your vessel information to other AIS receivers in your area while it receives their AIS target data. 

The AIT1500 is an ultra-compact Class B Transponder with two outputs; NMEA 0183 and USB, allowing it to work with the majority of existing and legacy AIS compatible chart plotters or computer software packages on the market today. Featuring a remote silence button option, two NMEA 0183 Inputs and Outputs, integral USB cable, four status LEDs and a new rugged ABS plastic enclosure, the AIT1500 is the...

Networked wind sensor for Triton², Triton, IS42, IS40 and IS20 systems. Sensor only, does not include cable. Compatible with previous 508 and IS20 wind sensor mast cables and brackets. Please note, this is a replacement wind sensor for ongoing service support. We do not recommend this model for new systems, please see the latest WS300 range for new system designs.

B&G mast cable 000-14396-001 with pre-moulded connectors is suitable for B&G WS310 and WS700 wind sensors. The mast cable measures 20 metres (65 feet) in length. Also available in 35m length, see 000-14397-001.

An MHU wind angle bearing for 213, 508 and 608 wind sensors.

This Nemesis™ 9-inch intelligent sailing display provides outstanding visibility from all angles and distances on-board. Completely customisable, the display allows the user to choose from pre-set templates, set up automatic point of sail dashboards or entirely create their own. The Nemesis™ features a bright touch screen with wide viewing angles and the ability to view with polarised...

Replacement wind speed bearing for B&G wind sensors. This speed bearing is compatible with WS310, WS320, WS700 series, 608, 508, 213 and 496 sensors.

Non-stocked - 5 week average lead time

The B&G Triton Edge sailing processor delivers an enhanced suite of sailing data such as advanced Start Line calculations, advance true wind data and autocalibration, boat speed calibration and correction, wind correction for heel/trim, improving accuracy of your autopilot and sailing information. Wi-Fi and Ethernet allows for expanded integration with Triton 2 and Nemesis displays, as well as...

The full-colour Triton² Display provides a clear visual representation of key instrument data including speed, depth, wind, heading, AIS targets, GPS data and more. The optically bonded display prevents fogging and condensation, while transflective LCD technology provides exceptional contrast and visibility, while consuming less power than traditional backlight-only displays. The flexible,...

A Triton² wired speed, depth and wind pack made up of the following contents: • Triton² 4.1 Inch colour display (000-13294-001) • DST-810 Sensor (000-15735-001) • WS310 Wind Sensor (000-14391-001) • WS310 (wired) Interface (000-14389-001) • NMEA2000 starter kit (000-10760-001) • WS300 20-metre (65ft) Cable (000-14396-001)

Triton² speed and depth pack made up of the following contents: • Triton² multi-purpose sailing instrument and autopilot display with 4.1-inch colour screen (000-13294-001) • DST-810 depth, speed and temperature sensor with plastic thru-hull housing (000-15735-001) • NMEA 2000 Micro-C starter kit (000-10760-001)

B&G 000-14389-001 wired interface for use with WS310 wind sensors, allowing connection to your NMEA 2000 network. Connectivity: NMEA 0183 Sentences supported: MWV,R NMEA 2000 Connectivity: 1 x Micro-C port, 1 LEN

A WS310 wind sensor pack designed to deliver highly accurate and fast wind data to instruments in all conditions at all points of sail and heel. Pack contents: • WS310 Wind Sensor (000-14391-001) • WS310 (wired) Interface (000-14389-001) • WS300 35-metre (115-foot) Cable (000-14397-001)

Non-stocked - 5 week average lead time

Test option to ensure system is working properly. Alarm will sound from the BR540 Cabin Alarm Panel if the watch officer has not pressed the Timer Reset Button. Meets IMO resolution MSC.128(75) for BNWAS (Bridge Navigational Watch Alarm System).

Test option to ensure system is working properly. Meets IMO resolution MSC.128(75) for BNWAS (Bridge Navigational Watch Alarm System). Covers approximately 5 meters in diameter when installed overhead at height of 3 meters.

The FI-70 sports a vibrant 4.1" bonded color display that is visible even in the harshest sunlight conditions. It features an easy to operate graphical user-interface that allows the user to customize almost every display property, to choose how and what information is displayed.

The FI-70 DST Pack contains a DST800 Active Depth, Speed & Temperature transducer, and a FI-70 Colour Multi Function Instrument Display. 

Highly accurate position fixing GPS navigator with clear colour LCD. The FURUNO GPS navigator GP-39 provides accurate and reliable position fixing, thanks to a 12-channel GPS receiver combined with integrated SBAS (WAAS/EGNOS/MSAS) technology. The GP-39 has various display modes (Plotter, Highway, Steering, NAV data, Satellite monitor and 2 user customizable modes) on the 4.2" colour LCD. Up to 3,000 points of ship track, 10,000 waypoints and 100 routes (each with up to 30 waypoints) can be stored. The waypoint and route data can be exported/imported via a USB flash drive or signal converter. The GP-39 can be networked with a fish finder, sonar, radar or other navigation equipment for feeding highly accurate navigation data.

Surface or Bezel Mount Size: 135 x 135 x 60mm Weight: 0.76Kg Furuno Intercom Speaker for LH-5000#html-body [data-pb-style=""63907256658BE""]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px...

Loud Hailer PA System which can be used in many applications from recreational boats to work boats and fishing vessels.

The PG-500 is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading. These sophisticated components are contained within a rugged, compact case. Unique design elements make the PG-500 virtually maintenance-free and easy to install.