Grid
List
Glomex 1.5mtr Fibreglass VHF Antenna (RA112)
The Glomex RA112 is a 1.5 mtr (5’) GRP VHF antenna with a white nylon ferrule and standard 1'x14 thread.
Due to its size this antenna is intended for installation on motorboats and small yachts using any of the compatible Glomex mounting brackets.
Its shape is identical to that of the RA128 (AM/FM) and RA127 (CB) antennas for a balanced look of your boat.
Supplied with 4.5 mtr...
Glomex 2.4mtr Fiberglass VHF Antenna (RA1206CR)
The Glomex RA1206CR is a 2.4 mtr (8’) GRP VHF antenna with chrome ferrule and standard 1'x14 thread.
This antenna is intended for installation on motorboats and yachts using any of the compatible Glomex mounting brackets.
Its shape is identical to that of the RA1288 (VHF) antenna for a balanced look of your boat.
Supplied with 4.5 mtr of cable and PL259 co-ax plug
Recommended...
Glomex 1.5mtr Fiberglass AM/FM Antenna (RA128)
The Glomex RA128 is a 1.5 mtr (5’) GRP AM/FM antenna with plastic ferrule and standard 1'x14 thread.
Due to its size this antenna is intended for installation on motorboats and small yachts using any of the compatible Glomex mounting brackets.
Its shape is identical to that of the RA112 (VHF) and RA127 (CB) antennas for a balanced look of your boat.
Supplied with 6 metres of cable...
Glomex 2.4mtr Fiberglass AM/FM Antenna (RA1288)
The Glomex RA1288 is a 2.4 mtr (8’) GRP AM/FM antenna with chromed ferrule and standard 1'x14 thread.
This antenna is intended for installation on motorboats and yachts using any of the compatible Glomex mounting brackets.
Its shape is identical to that of the RA1206 (VHF) and RA1278 (CB) antennas for a balanced look of your boat.
Supplied with 6 metres of cable and motorola plug
Recommended...
Garmin GA 38 GPS / GLONASS Antenna
Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile water resistant housing and provides 3 easy mounting solutions.
Glomex V9175 Nylon Universal Antenna Mount
Glomex V9175 Nylon Universal Antenna Mount
Made from tough uv stabilised nylon
Ideal for use with most antennas and extentions
1"x14 Standard thread
Height: 100mm (4")
Nuova Rade Nylon Fixed Antenna Rail Mount
The Nuova Rade antenna mount is manufactured in reinforced nylon UV resistant with fixed rail mount design.
Compatible with most other makes of marine antenna using the standard 1' x 14 thread and Glomex extension poles, used to gain greater height for either VHF or GPS antenna.
Suits 22mm & 25mm rail size
Nuova Rade Nylon Universal Antenna VHF GPS Mount
Nylon Universal Antenna Mount
Made from tough uv stabilised nylon
Ideal for use with most antennas and extentions
1"x14 Standard thread
Height: 100mm (4")
Nylon Flange Fixed Antenna VHF GPS Mount
Low-profile Flange Mount – nylon. Moderate-duty, low profile, 1in. High mount with standard 1in-14 threads. Same as style 4710, but made of nylon for moderate-duty applications.
Low-profile
Standard 1in-14 thread.(male)
Nylon construction
Glomex RA145 Nylon Fixed Antenna Rail Mount
The Glomex RA145 antenna mount is manufactured in reinforced nylon UV resistant with fixed rail mount design.
Compatible with most other makes of marine antenna using the standard 1' x 14 thread and Glomex extension poles, used to gain greater height for either VHF or GPS antenna.
Suits 22mm & 25mm rail size
With cable slot
Glomex RA115 4 Way Nylon Ratchet Mount
The Glomex RA115 4 way ratchet mount is manufactured in reinforced nylon UV resistant with locking handle design which can be bulkhead or deck mounted.
The RA115 mount is compatible with most other makes of marine antenna using the standard 1' x 14 thread
Cable from the VHF, AM/FM or GPS antenna can be passed through the bracket to ensure watertight seal.
Base: H 100mm x W 60mm
Height...
Glomex RA135 4 Way Nylon Ratchet Mount (Knob)
The Glomex RA135 4 way ratchet mount is manufactured in reinforced nylon UV resistant with locking knob design which can be either bulkhead or deck mounted.
The RA135 mount is compatible with most other makes of marine antenna using the standard 1' x 14 thread
Cable from the VHF, AM/FM or GPS antenna can be passed through the bracket to ensure watertight seal.
Base: H 100mm x W 60mm...
Glomex Stainless Steel Adjustable Antenna Mount
Glomex heavy duty 4 way ratchet mount polished stainless steel design with handle locking, for deck or bulkhead mounting.
Suplied with a hole for GPS and antenna co-ax cable feed-thru and usable with antennas no longer than 9’ (2,7 m) in self supporting mode.
Standard 1”x14 thread
OA Height: 15cm
Base Dimensions:
Width: 100mm x Depth: 60mm
Glomex V9174 Stainless Steel Universal Antenna Mount
Glomex V9174 Stainless Steel Universal Mount
Made from electropolished stainless steel
Ideal for use with most antennas and extentions
1'x14 Standard thread
Height: 100mm (4')
Shakespeare Stainless Steel Extension Pole 30cm
Stainless Steel Extension Pole Heavy duty, 316 grade stainless steel.
Extension Pole with 1in x 14TPI thread, male and female fittings.
Ideal for GPS, VHF and other antennas.
Length: 30cm (1ft)
Shakespeare Nylon Flange Mount
Low-profile Flange Mount – nylon. Moderate-duty, low profile, 1in. High mount with standard 1in-14 threads. Same as style 4710, but made of nylon for moderate-duty applications.
Low-profile
Standard 1in-14 thread.(male)
Nylon construction
Shakespeare 4186 Nylon Ratchet Antenna Mount
4186 NYLON RACHET MOUNT
Four-way nylon rachet mount with handle for deck or side mounting
Standard 1"-14 thread
Quick release lever allows antenna fold-down
For antennas up to 2.4m in self support mode
Glomex RA101 Antenna Base Rectangular Wedges
Glomex Set Of 3 Pieces Of Rectangular Wedges.
Set of 3 rectangular wedges for Glomex ratchet mounts to keep the antenna vertical on inclined surfaces.
Glomex RA140 Cable Feed Through
Nylon feed through for passage of one or two cables and connectors through the deck.
Supplied with 3 x Stainless screws
Glomex RA106 Stainless Adaptor - Standard Thread 1''X14
Stainless Steel adaptor for RA106 PB antennas.
Standard thread 1”x14.
Glomex VHF/AIS AM-FM Radio Splitter (RA201)
The RA201 splitter allows the use of one VHF antenna to simultaneously receive the AM/FM and AIS radio signals; furthermore, the VHF transceiver can also be used.
It is a compact, economical and safe product, easy to install in any place. It requires only a 12V power supply with maximum of just 25 mA power consuption. It is provided with a coaxial input for the antenna and three outputs for VHF,...
Shakespeare VHF/AIS Splitter & AM/FM
Shakespeare VHF/AIS AM/FM Splitter
This unit is designed for use with an AIS receiving only unit. A single VHF antenna is used simultaneously for VHF, AM/FM and AIS receiving providing an ideal solution where there is a need to avoid multiple on board antenna and to simplify your marine electronics needs.
The splitter enables boaters to operate VHF radios, AIS receivers and AM/FM radio simultaneously...
V-Tronix ACC105 Deck Plug and Socket for RG58 Cable
Rugged waterproof Co-Ax deck plug and socket for RG-58 coaxial cable that provides a convenient connection particulary useful when stepping/unstepping masts. The fittings are made from nickel plated brass with silver plated contacts for extra efficiency.
Ideal for joining/breaking VHF cable at deck level, with a large 44mm flange provides a watertight seal.
Complete with shroud and screws and full...
PL259 Connector for RG58 Cable
High quality male connector, nickel plated with silver tip and teflon insulator
PL259 Connector for RG213 Cable
High quality male connector, nickel plated with silver tip and teflon insulator
Double Female Connector for PL259
Double female connector for PL 259. High quality, nickel plated with brass inner conductor.High electrical breakdown
Furuno FAP7011C NAVpilot Colour Control Head
FURUNO's NAVpilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course keeping capability, dynamically adjusting essential parameters for navigation i.e., vessel speed, trim, draught, tide and wind effects, dead band, weather, etc. These parameters are stored in the system memory and continuously optimized.
Furuno MCU-004 Remote Control for Navnet TZtouch/Navnet TZTouch2
Designed for those captains who have multiple TZtouch or TZtouch2 displays on their helm or bridge, a single MCU004 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU004 Remote Control is a perfect companion for any helm or bridge.
Furuno MCU002 NavNet TZT Controller
The MCU002 Remote Controller is compatible for use with the entire NavNet TZtouch & TZtouch2 series. This controller really benefits installations where the displays are recessed and/or mounted a bit out of conventional reach. The design of the controller is extremely compact and light, allowing it to be installed anywhere, even as an "Armchair Controller", if desired.
Furuno Navpilot 711C Autopilot
FURUNO's NAVpilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course keeping capability, dynamically adjusting essential parameters for navigation i.e., vessel speed, trim, draught, tide and wind effects, dead band, weather, etc. These parameters are stored in the system memory and continuously optimized.
Garmin Actuator Power Cable
Actuator Power Cable Replacement for GHP 12 Autopilot System
Garmin Autopilot ECU for GHP 12 Autopilots
One of five main components of your GHP ™ 12 Autopilot System, the ECU connects and powers the course computer unit (CCU) and the hydraulic pump, controlling the pump based on information received from the CCU.
Garmin Autopilot ECU to CCU Extension Cable - 25m
Garmin ECU to CCU Extension Cable with Quarter-turn collar - 25m.
Garmin Autopilot ECU to CCU Extension Cable - 5m
Garmin ECU to CCU Extension Cable with Quarter-turn collar - 5m.
Garmin Autopilot SmartPump v2
Put an end to guessing which pump size will work with any particular boat. One SmartPump v2 works for most hydraulically steered boats and applications.
Garmin Buzzer for GHP 10
Wire this buzzer to your Autopilot's course compass unit (CCU) to receive audible alerts from your GHP™ 10.
Garmin Class A Mechanical Drive Unit
The Class A Drive Unit works with the GHP 12 Marine Autopilot System to control your sailboat's steering system.
Garmin Course Computer Unit for Reactor 40 Autopilots
The Course Computer Unit is the brain of the Reactor 40 autopilot system, containing sensory equipment used to determine heading and rate of turn.
Garmin ECU Power Cable
Provide power to your electronic control unit (ECU) with this ECU power cable. Simply wire the ECU power cable to your boat battery as one of the last connections made during GHP™ 10 installation.
Garmin GHC 50 Marine Autopilot Instrument
The GHC 50 works with all GHP Reactor autopilots, select Quatix multisport marine smartwatches, the Garmin autopilot remote and GRID 20 remote.
Garmin GHP Reactor 40 Steer-by-wire Standard Corepack & GHC 50
This corepack works with SeaStar Optimus systems, Yanmar Marine ZT370 sterndrive electronic power steering systems and ZF 2800 Pod drives. It requires a compatible Garmin chartplotter. The GHC 50 autopilot instrument to add a dedicated, touchscreen autopilot display to the helm. Plus, GHC 50 shares data and settings with Garmin MFDs and other installed Garmin devices.
Garmin Reactor 40 1.2 Litre Autopilot pump kit
Use the Garmin 1.2 Litre per minute (0.32 gallon per minute) pump kit with a Reactor™ 40 system to pump hydraulic fluid to the steering cylinders and steer the boat.
Garmin Reactor 40 2 Litre Autopilot Pump Kit
Use this 2.0 Litre per minute (0.53 gallon per minute) pump kit with a Reactor™ 40 system to pump hydraulic fluid to the steering cylinders and steer the boat.
Garmin Reactor 40 Hydraulic Autopilot - Corepack & Smartpump V2
With a complete package designed for powerboats and sailboats, Garmin brings an advanced marine technology to the boating public that was once only available for commercial boats. The Reactor 40 autopilot series is simply the most responsive autopilot system we have ever offered.
Garmin Reactor 40 Hydraulic Autopilot Corepack with GHC 20
With a complete package designed for powerboats and sailing boats, Garmin brings an advanced marine technology to the boating public that was once only available for commercial boats. The Reactor 40 autopilot series is simply the most responsive autopilot system Garmin have ever offered. Includes GHC 20 Marine Autopilot Control Unit.
Garmin Reactor 40 Hydraulic Autopilot Corepack, SmartpumpV2 & GHC 50
This corepack’s compact, brushless SmartPump fits most sailboats and powerboats with a hydraulically steered boating system. The GHC 50 autopilot instrument to add a dedicated, touchscreen autopilot display to the helm. Plus, it allows the autopilot to share data and settings with Garmin MFDs and other installed Garmin devices.
Garmin Reactor 40 Kicker Autopilot
The Reactor 40 kicker autopilot can help maintain heading hold and route to keep boats on course — even against wind, waves or heavy current.
Garmin Reactor 40 Kicker Autopilot & GHC 50
This kicker autopilot works for boats with small gasoline outboard motors up to 25 horsepower. The GHC 50 autopilot instrument adds a dedicated touchscreen autopilot display to the helm. Plus, the GHC 50 shares data and settings with Garmin MFDs and other installed Garmin devices.
