Grid
List
Raymarine ST40/60 20m Extension Cable
Length 20m.
Raymarine STng (M) to Devicenet (F) Adaptor
Raymarine STng (M) to Devicenet (F) Adaptor.
Raymarine STNG / NMEA 2000 Gateway Cable Kit
The Raymarine NMEA2K STNG gateway cable kit is an all in one kit to help integrate NMEA2000 components into your existing SeaTalkNG backbone system.
Raymarine STNG Auxillary Alarm with 1m Spur Cable
The Raymarine SeaTalkng Alarm Buzzer is a network accessory that repeats alarm and alert tones from compatible networked devices ensuring alarms and alerts can be heard on-deck and below decks as needed.
Raymarine STNG Backbone (F) to DeviceNet (F) Adapter Cable - 400mm
Connect SeaTalkng and NMEA2000 backbones together with these backbone cable adapters. Female STNG to Female DeviceNet / NMEA 2000 Version (Female to Male) Version also available, see product: 705-A80674
Raymarine STNG Backbone (F) to DeviceNet (M) Adapter Cable - 400mm
Connect SeaTalkng and NMEA2000 backbones together with these backbone cable adapters. Female STNG to Male DeviceNet / NMEA 2000 Version (Female to Female) Version also available, see product: 705-A80675
Raymarine STNG Backbone Kit
SeaTalkNG is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables.
Raymarine STNG Backbone Terminator
SeaTalk ng Terminator - Fitted at each end of backbone, two are required per system. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range...
Raymarine STNG Power Cable
SeaTalk ng Power cable - A cable to connect a SeaTalk ng backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically...
Raymarine STNG right angle Adaptor
SeaTalk ng right angled adaptor used to connect spur cable to SeaTalk ng device when space behind is limited.
Raymarine STNG Starter Kit (1xA06064 2xA06031 1xA06040 1xA06049)
SeaTalk ng Starter Kit - The SeaTalk ng Starter Kit is the perfect way to get started with your SeaTalk ng compatible Raymarine product. The 5-way connector forms the start of your SeaTalk ng backbone and your SeaTalk ng product is connected via a Spur Cable. What's in the kit?. A06064: SeaTalk ng 5-way Connector. A06031: SeaTalk ng Backbone Terminator (x2). A06040: SeaTalk ng Spur Cable 3m. A06049:...
Raymarine STNG T-Piece Connector
SeaTalk ng T-Piece - Connects spur to backbone. Used for connecting white SeaTalk ng Spur Cables to Blue SeaTalk ng Backbone Cables. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to...
Raymarine STNG to Devicenet (Female) adaptor Cable (1m)
Raymarine SeaTalkng to devicenet (Nmea2000) female (F) adapter cable 1m. .
Raymarine STNG to Devicenet (Male) adaptor Cable (1m)
STNG to Devicenet (Male) Adaptor Cable 1 meter.
Raymarine STNG to SPX Moulded Cable - 1m
SPX course computer spur cable for connection to the SeaTalkNG backbone.
Raymarine STNG-ST1 Spur Cable 1m
ST1 Adaptor Cable (3 Pin) - 39.4in (1.0m).
Raymarine VHF NMEA0183 TO STNG Converter Kit
Used for connecting an Isolated NMEA0183 VHF to the SeaTalkng network.
Raymarine White Spur Cable 6m (RS130 antenna cable)
Spur Cable - 19.68ft / 6m Individual devices connect to the SeaTalkNG backbone by spur cables that run to T-pieces on the backbone.
Raymarine Wind Transducer 30m Mast Cable & Connector
Masthead Cable 30M .
STNG Elbow to Elbow Spur Cable (400mm)
Raymarine’s proprietary cable system for use in NMEA 2000 networks. The design provides two advantages. First, the connector collars are retained on the product which allows for a smaller cable diameter making installations easier. More importantly, the cable can include a sixth wire which allows for backward compatibility with SeaTalk1 equipment. Products with SeaTalkng connectors can be used...
Raymarine Spur Cable
Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone via T-pieces or 5 way connectors