Grid
List
Hinges - Polyamide (Various, Black/White)
Made of polyamide
With inox pin
Available in various shapes
Available in black & white colour
Polyamide Plastic Hinge 30x60x3mm Black
Made of polyamide
With Stainless Steel Pin
30x60x3mm
Rectangular
Polyamide Plastic Hinge 40x75x3.5mm Black
Made of polyamide
With Stainless Steel Pin
40x75x3.5mm
Rectangular
Polyamide Plastic Hinge 60x40x3mm Black
Made of polyamide
With Stainless Steel Pin
60x40x3mm
Rectangular
Polyamide Plastic Hinge Hexagonal 95x60x4.5mm Black
Made of polyamide
With Stainless Steel Pin
95x60x4.5mm
Hexagonal
Black
Polyamide Plastic Hinge Hexagonal 95x60x4.5mm White
Made of polyamide
With Stainless Steel Pin
95x60x4.5mm
Hexagonal
White
Stainless Steel Flush Hinge 70mm x 38mm
Stainless Steel Top Pin Hinge
Flat round sided hinge in 316 stainless steel
Size (Open) 70 x 38.5mm
Length 35 + 35mm = 70mm
Thickness 2mm
4 x 4mm or No.8 CSK fixings required
Stainless Steel Hinge 101mm x 30mm
2 Holes per plate
Stainless Steel Hinge 140mm x 40mm
3 Holes per plate
Stainless Steel Hinge 77mm x 40mm
3 Holes per plate
Stainless Steel Flush Hinge 70mm x 38mm
Stainless Steel Flush 2 Pin Hinge, with casted centre piece, ideal for folding tables.
Flush 2 Pin Hinge
75mm x 38mm
Stainless Steel Hinge 75 x 40mm
Stainless Steel Back Flap Cuddy Hinge
Flat round sided hinge in 316 stainless steel
Size (Open) 75 x 40mm
Length 37.5 + 37.5mm = 75mm
Thickness: 2mm
6 x 4mm or No.8 CSK fixings required
Stainless Steel Hinge 127.5 x 40mm
Stainless Steel Cuddy Hinge
Flat round sided hinge in 316 stainless steel
Size (Open) 127.5 x 40mm
Length 37.5 + 90mm = 127.5mm
Thickness: 2mm
7 x 4mm or No.8 CSK fixings required
Stainless Steel Hinge 180 x 40mm
Stainless Steel Back Flap Hinge
Flat round sided hinge in 316 stainless steel
Size (Open) 180 x 38.5mm
Length 90 + 90mm = 180mm
Thickness: 2mm
8 x 4mm or No.8 CSK fixings required
Stainless Steel Hinge 103 x 40mm
Stainless Steel Hinge
Flat round sided hinge in 316 stainless steel
Size (Open) 103 x 38.5mm
Length 35 + 68mm = 103mm
Thickness 2mm
5 x 4mm or No.8 CSK fixings required
Stainless Steel Hinge 95 x 40mm
Stainless Steel Hinge
Flat round sided hinge in 316 stainless steel
Size (Open) 95 x 38.5mm
Length 27 + 68mm = 95mm
Thickness: 2mm
5 x 4mm or No.8 CSK fixings required
Stainless Steel Hinge 136 x 40mm
3 Holes per plate
Heavy Duty Cast Stainless Steel Hinges 65mm x 126mm
These heavy duty hinges are manufactured from cast 316 Stainless Steel, and are hand polished.
Supplied in two configurations, with either countersunk fixing or concealed stud fixings.
10A-86323C - Countersunk - 65mm x 126mm (hinge opens 180 deg.)
10A-86323D - Concealed Stud - 65mm x 126mm (hinge opens 180 deg.)
Heavy Duty Cast Stainless Steel Hinges 40mm x 126mm
These heavy duty hinges are manufactured from cast 316 Stainless Steel, and are hand polished.
Supplied in two configurations, with either countersunk fixing or concealed stud fixings.
10A-86332C - Countersunk - 40mm x 126mm (hinge opens 180 deg.)
10A-86332D - Concealed Stud - 40mm x 126mm (hinge opens 180 deg.)
Deck Filler Tube With Plastic or Chrome Plated Cap Waste Fuel Water
The Deck Filler range of Nuova Rade includes deck fillers suitable for water, fuel and waste.
They are designed in such a way that the full lid area is totally covered, which makes the final look much more attractive. Each deck filler can have a different function, which will always be clear - by using the relevant sticker (water, fuel, waste) included in each filler’s packaging. They are...
Key Free 38mm Stainless Deck Filler
Key free deck filler, manufactured from 316 stainless steel, these deck fillers are available with 38mm hose tail and labelled for Diesel, Water, Waste and Petrol.
Labelling on the cap and the flange
Cap retaining chain (not supplied or fitted to the waste version)
77mm dia flange
85mm dia cap
75mm Hose Tail
3 x M5 fixings required (supplied extra)
Plastic Fuel Deck Filler with Cap
Plastic deck filler.
Available in Black or White with Red Fuel Cap
For 2" Hose 51mm
A = 85mm
B = 55mm
C = 48mm
D = 33mm
E = 26mm
F = 72mm
G = 46mm
Water Fuel Waste Deck Filler 38mm Winch Handle Opening
Nuova Rade Inox Deck Fillers with Cap are suitable for fuel, fresh water or waste. The use is easily indicated by the colour of the cap: blue for fresh water, red for fuel and brown for waste. The main body is made of reinforced PA. The cap is made of Stainless Steel 316 and reinforced PA for endurance and extra durability in the marine environment.
The cap features a lanyard in order not to be...
Key Free 50mm Stainless Deck Filler
Key free deck filler, manufactured from 316 stainless steel, these deck fillers are available with 50mm hose tail and labelled for Diesel, Water, Waste and Petrol.
Labelling on the cap and the flange
Cap retaining chain
77mm dia flange
95mm dia cap
85mm Hose Tail
3 x M5 fixings required (supplied extra)
Winch Handle Opening 38mm Deck Filler
Polished 316 stainless steel deck fillers with winch handle socket for opening and 38mm hose tail.
The caps and flanges are labelled for Diesel, Water, Waste and Petrol
Winch handle opening
75mm Hose Tail
75mm flange dia
85mm cap dia
3 x M5 fixings (supplied extra)
Winch Handle Opening 50mm Deck Filler
Polished 316 stainless steel deck fillers with winch handle socket for opening and 50mm hose tail.
The caps and flanges are labelled for Diesel, Water, Waste and Petrol
Winch handle opening
75mm Hose Tail
85mm flange dia
95mm cap dia
3 x M5 fixings (supplied extra)
Bailer Funnel with Filter 290 x 110 mm
Bailer Funnel w/Filter, 290 x 110 mm
Barton Marine Dinghy Mast Support
The Dinghy Mast Support is designed to support the aft end of a dinghy mast when towing. Simply fits onto standard transom fittings and is instantly ready for use. Fully adjustable for different transom heights and features a removable pintle to accommodate different transom layouts. The yolk features a soft neoprene pad to protect the mast, shrouds and lines. Generous eyelets in the yolk allow for...
Barton Marine High Load Eye
The High Load Eye with loop is available in 3 sizes and can be used in various applications on board including Baber hauler, preventers, mast base block, tidies, emergency, occasional and toe rail blocks etc.
Barton Marine High Load Low Friction
The High Load Low Friction Eye/Ring with loop is available in 6 sizes and can be used in various applications on board including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks and toe rail blocks etc. The High Load Low Friction Eye/Ring combined with the Dyneema loop gives you a fast, efficient, simple and extremely strong solution to changing the direction of...
Buoyancy Bag with valve for Optimist
Buoyancy Bag with valve for Optimist, Nylon with TPU, max. air pressure 3.6PSI, 41x100cm, grey
Plastic Hand Held Dinghy Bailer
Dinghy Hand Bailer
A simple plastic scoop bailer suitable for dingies and clearing the last drop of bilge water.
The bailer has a decent handle which to grab and flexible enough that it wont get broken easily.
L190 x W135mm
1 Litre
We suggest tying off with some cord to ensure it doesn't go missing.
Plastic Hand Held Dinghy Bailer Scoop
Dinghy Boat Hand Bailer
A heavy duty plastic scoop bailer suitable for dingies and clearing the last drop of bilge water.
The bailer has a decent handle which to grab and flexible enough that it wont get broken easily.
158x128x215mm
2.5 Litres
RWO 16mm Track End Stop Black Plastic (x4)
For 19mm stainless steel tracks. Slides, available with and without spring loaded positive plungers.
LIMITED END OF LINE STOCK AVAILABLE.
RWO Cleat 8mm Halyard Black 90mm Long (x2)
Halyard Cleats:
Self jamming cleat, suitable for halyards, control lines, down hauls etc. For ropes up to 8mm.
Length 90mm
Weight 6g
LIMITED END OF LINE STOCK AVAILABLE.
RWO R2064 – Bung Only For R2060
Bayonet white drain bung aperture 17mm diacut out 22mm, replacement bung for R2060
LIMITED END OF LINE STOCK AVAILABLE.
RWO R8370 – 10mm Thru Deck Low Friction Bush
R8370 – 10mm Thru Deck Low Friction Bush
Thru-deck low friction bush bore dia 10mm, hole dia 14mm, depth thru deck 8mm, weight 2.2gms, the PTFE coating seals each unit creating an extremely low friction surface. Friction is only increased by 15% compared to a plain bearing block. Up to 250% stronger, constructed from HE30 marine grade aluminium and anodised to 40 microns. Up to a 90% reduction...
RWO Spare Bung for 6-R2221 19mm (x2)
Bungs, All the choice you need for transom or buoyancy tank drains. Three types available, push-fit rubber bung version, a half turn bayonet and a screw thread + 'O' seal all with matching sockets. Both bayonet and screw bungs are fitted with a retainer to prevent loss. Spare bungs, are available separately.
LIMITED END OF LINE STOCK AVAILABLE.
Allen AL-0052 7mm Bullseye Fairlead (Pack of 2)
7mm Bullseye Fairleads are ideal for running ropes or wires around your boat, and feature impact and UV resistant material.
Pack of 2.
Allen AL-0452 11mm Bullseye Fairlead (Pack of 2)
Acetal open based and bullseye rope fairleads
Inside Diameter – 11mm
Fixing Hole Size – 3mm
Distance between fixing – 18mm
Weight – 4g
Allen AL-0153 7mm Low Profile Fairlead (Pack of 2)
This low profile 7mm Fairlead from Allen has been injection moulded with high-grade acetal, and comes supplied in packs of 2.
Allen AL-0099 Plastic Toe Strap Webbing Plate
Plastic fixing plates for toe strap webbing
Size 47mm Length
Grey or White
Supplied as a pair
Clamcleat CL203 Junior Rope Cleat
Clamcleat Junior CL203 rope cleat with fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Black plastic
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat CL209 Midi Rope Cleat
Clamcleat Midi CL209 rope cleat without fairlead suitable for most dinghy applications.
Suitable for 4-8mm dia. rope
Black plastic
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat CL205 Major Rope Cleat
Clamcleat Major CL205 rope cleat without fairlead suitable for most dinghy and dayboat applications.
Suitable for 10-16mm dia. rope
Black plastic
Fixings: 2 x No.14csk screws - 5/16 rivets - M8 csk set bolt
Clamcleat C211 MK2 Racing Junior Rope Cleat
Clamcleat Racing Junior CL211 MK2 rope cleat with fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat C217 M1 Starboard Side Entry
Clamcleat Junior CL217 rope cleat with side entry fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Side entry fairlead allows ropes to be hooked in for cleating, yet easily removed
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat 3-6mm Side Starboard Hard Anodised Grey Mk2
Clamcleat Junior CL217 MK2A rope cleat with side entry fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Side entry fairlead allows ropes to be hooked in for cleating, yet easily removed
Hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt