Hardware: Page 47

Clamcleat Junior CL236 MK1 Racing rope cleat with top roller suitable for most dinghy applications. The top roller allows ropes to enter the cleat from above and is also ideal for sun umbrellas, shades and sun sails. Suitable for 3-6mm dia. rope Available in silver or hard anodised finish. Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt

Clamcleat Side Fixing Midi CL215 rope cleat without fairlead suitable for most dinghy applications. Suitable for 4-8mm dia. rope Black plastic Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt

CL238 Racing Vertical with Spring Gate When using the Clamcleat CL238, the red gate is flipped up by hand to keep the rope out of the alloy cleat and prevent unintentional entry of the rope into the cleat. Rope Diameter: 6 - 12mm Material: Aluminium Hole Centres: 72mm Length: 91mm Width: 40mm Height: 33mm Bolt Size: M6 Screw Size: 6.3 (No 14)

Old style RWO 21mm double block with becket and key pin shackle. Suitable for dinghy downhaul/outhaul as any load is taken on the stainless shackle which connects through the body of the block. 21mm sheeve diameter 8mm sheeve width 5mm shackle diameter O/A Size: W40mm x L50mm Colour options: Orange or Blue

Stainless steel fast pins features a ring for rigging stay adjustment, as well as stainless steel reaching hooks for use with Allen anchor plates. Stainless steel AISI 316 Sizes: 6mm x 35mm (20mm useable) Sold in pairs

Marine Black Lacing Hooks upto 8mm, Pair

Stainless steel rubbing strakes, to help prevent rope wear to deck edges and coamings. Available in three lengths, these attractive strakes are easy to fit and will last a lifetime.

Marine White Lacing Buttons, Pair

Marine White Toe Strap Bridges 50mm, Pair

Stainless steel Canopy Press Stud Kit for use on canopy, spray dodgers, sail covers and tonneau covers. This option is suitable for material to fibreglass/wood or other structure of the vessel. To Install: Simply mark the hole position on the fabric, place the die on the under side of the fabric and using a hammer and the punch one or two good hits should break the fabric creating a hole. Now reverse...

Brass eyelets for use on canopy, spray dodgers, sails and tonneau covers. Various sizes to suit different cord and shockcord diameters and the kit is supplied with a punch and die to aid fitting. To Install: Simply mark the hole position on the fabric, place the die on the under side of the fabric and using a hammer and the punch one or two good hits should break the fabric creating a hole. Now reverse...

Brass eyelets for use on canopy, spray dodgers, sails and tonneau covers. Various sizes to suit different cord and shockcord diameters and the kit is supplied with a punch and die to aid fitting. To Install: Simply mark the hole position on the fabric, place the die on the under side of the fabric and using a hammer and the punch one or two good hits should break the fabric creating a hole. Now reverse...

RWO S/S LACING HOOK (x10) Suitiable for up tp 6mm Bungy

A4 Marine Grade Stainless Steel Nyloc Nuts M4 x 10 M5 x 10 M6 x 5 M8 x 5 M10 x 4

A4 stainless steel penny or repair washers We stock a wide range of A4 stainless fixings give us a call if you can't find what you need. Sold in singles

A4 Marine Stainless Steel Hex Head Bolt Set Supplied with Bolt, Washer and Full Nut 2 pack

Size M4 A4 Marine Stainless Steel Pozi Pan Head Bolt Set Supplied with Bolt, Washer and Full Nut 2 pack

Size M5 A4 Marine Stainless Steel Pozi Countersunk Bolt Set Supplied with Bolt, Washer and Full Nut 2 pack

Monel (nickel copper) alloy rivets. Monel rivets are commonly found in aerospace, marine, and oil and gas production/refinery applications, as well as in high end musical instruments, among other uses. Corrosion resistant for use with aluminium & stainless. Suitable for marine applications. Pack of 6