Moisture Mate Absorber
Moisture Mate helps keep unwanted moisture under control, reducing the risk of condensation, damp, midew and unpleasant smells.
Each unit comes with enough absorption crystals to remain active for up to 3 months. The handy sized refill bags mean your Moisture Mate is infinitely reusable.
Seago Smart Dry 2 Dehumidifier
The Seago Smart Dry 2 dehumidifier is the smart way to control damp, condensation and mould. Sleek compact design with a convenient carry handle that folds down, making the Smart Dry 2 easy to transport with a small footprint of 460 x 280 x 160mm.
The Smart Dry 2 dehumidifier dries the air effectively and efficiently with a powerful fan and compressor linked to the accurate humidity sensors. Using...
Slimline Boat Electric Tube Heater 28W
Fit these low power 240V tube heaters to create air circulation in enclosed spaces helping to prevent condensation, dampness, mould and wildew. The fitting of the heater is quite simple as each heater is supplied with brackets for temporary use or for permanent wall mounting or floor standing.
Each unit comes with a 1.5m push-fit power cable and plug which can be disconnected when not in use.
Safety...
Slimline Boat Electric Tube Heater 55w
Fit these low power 240V tube heaters to create air circulation in enclosed spaces helping to prevent condensation, dampness, mould and wildew. The fitting of the heater is quite simple as each heater is supplied with brackets for temporary use or for permanent wall mounting or floor standing.
Each unit comes with a 1.5m push-fit power cable and plug which can be disconnected when not in use.
Safety...
Slimline Boat Electric Tube Heater 90W
Fit these low power 240V tube heaters to create air circulation in enclosed spaces helping to prevent condensation, dampness, mould and wildew. The fitting of the heater is quite simple as each heater is supplied with brackets for temporary use or for permanent wall mounting or floor standing.
Each unit comes with a 1.5m push-fit power cable and plug which can be disconnected when not in use.
Safety...
Slimline Boat Electric Tube Heater 120w
Fit these low power 240V tube heaters to create air circulation in enclosed spaces helping to prevent condensation, dampness, mould and wildew. The fitting of the heater is quite simple as each heater is supplied with brackets for temporary use or for permanent wall mounting or floor standing.
Each unit comes with a 1.5m push-fit power cable and plug which can be disconnected when not in use.
Safety...
Slimline Boat Electric Tube Heater 190w
Fit these low power 240V tube heaters to create air circulation in enclosed spaces helping to prevent condensation, dampness, mould and wildew. The fitting of the heater is quite simple as each heater is supplied with brackets for temporary use or for permanent wall mounting or floor standing.
Each unit comes with a 1.5m push-fit power cable and plug which can be disconnected when not in use.
Safety...
Caframo 747 Silent 12 V Ultimate Fan
Ultimate 747 12V 2-Speed 7" Fan with lighter plug and suction mount.Caframo's most popular marine fan. Fingersafe blade allows for maximum airflow. 2 speed options.Industry recognized and a long time favorite of sailors! The model 747 Ultimate 12 Volt DC fan is recognized by Practical Sailor magazine as a "Best Buy" in the marine market. It features a Fingersafe blade that does not require a protective...
Caframo Bora Fan 12v
Caframo Bora Fan
The quietest and most powerful marine fan in its class
For use in any area of the boat, for venting sleeping berths, living areas or clearing windscreens
3 speed touch control
Locking cam mount
W17 x H24 x D9 cm
Fully guarded front and back
5000+ hour motor
Available in White or Black
Hella 8EV 006 239-002 12V Fan Black
Hella 239-002 Jet 12V fan series 6239, black
An economical fan similar to the popular "Turbo" models. They can be turned and rotated in all directions and locked in a given position.
130mm diameter fan blade with cover
switch on the front of the blade guard
side mounting, upright and suspended
C-Quip 12v Horizontal Windscreen Heater/Demister
A neat addition to any cabin or wheelhouse, this economically priced Windscreen heater/demister is mounted on an adjustable bracket and is supplied with wiring loom, 3 position switch (heat/off/air) and an in-line 15amp fuse holder.
Size: L197mm x H87mm
ECS 4022 Brass Hit & Miss Vent 225 x 150 mm
E C Smiths Polished Brass
Brass Hit & Miss Vent 225 x 150 mm
Strong 16 gauge sheet metal is used to manufacture metal vents
ECS 4088 Brass Hit & Miss Vent 150 x 75 mm
E C Smiths Polished Brass
Brass Hit & Miss Vent
150 x 75 mm
Strong 16 gauge sheet metal is used to manufacture metal vents
ECS 4099 Plain Slotted Vent 220 x 150 mm Polished Chrome
E C Smiths Polished Chrome Plain Slotted Vent
Brass Hit & Miss Vent 220 x 150 mm
Strong 16 gauge sheet metal is used to manufacture metal vents
Vetus Jerry S Cowl Ventilator
Vetus JerryS P.V.C Cowl Ventilator
Screw down cowl ventilator
8 in. height
3 in. base hole diameter
5 1/8 in. base outside diameter
Screw down base to attach to deck
Cowl ventilator made of flexible PVC
Screw down ring made of hard plastic
DIAMETER (MM)
75
MATERIAL
PVC
WITH SS RING AND NUT
Yes
COLOUR INTERIOR
Red
FREE FLOW AREA CM²
44,2
White Plastic Ventilator 420 x120mm
White Plastic vent
420 x 120 mm Overall size
385 x 90 x 60 mm Cutout Size
Wetline 186994 Plastic Louvered Vent 75mm Hose
Plastic vent
83mm x 83mm
Depth 55mm
For 75mm Ducting
Trem 9" (23cm) S/S Roof Top Ventilator
Trem attractive, low profile ventilator.
You can stand on it, avoids snagging, nothing to corrode or jam.
Safe maximum ventilation at all times,
waterproof except when submerged.
Can be mounted at any angle.
Trem 9" (23cm) Stainless Steel Ventilator
Exterior Dia.: 230mm
Interior Dia.: 115mm
ECS Ventilite Clear Roof Vent c/w S/S Cover
ECS VENTILITE CLEAR ROOF VENT C/W S/S COVER)
THE ECS VENTIDUCT SYSTEM
This is one of the original ventilation systems specifically designed for marine use and is still one of the best. It is a proven reliable product; with thousands of units installed on both commercial and pleasure craft throughout the world in the last four decades.
VENTAIR & VENTILITE STATIC VENTILATORS
Attractive ventilator...
ECS Ventilite Shut Off Vent c/w S/S Cover
ECS VENTILITE SHUT-OFF VENT WITH COVER
These are a completely waterproof version of the ECS Ventair/Ventilite ventilators. In cases of excessive water flow over the decks or coach roof, an inner sleeve complete with flush handle, is closed by moving in an upward direction to ensure 100% waterproofing.
This simple operation is carried out from within the cabin or wheelhouse, and vice versa; a downward...
Rule 75mm (3") In Line Blower 24 V
75mm (3") In-line blower, 24 volt DC
Connections: - for 75mm (3") ducting
Dimensions: - 130mm long, 95mm high, 125mm wide
Fuse Size: - 2.5(amp)
Output: - 3.8 cu.m/minute
Efficient high volume air flow
Quiet running
Slip-on inlet and outlet ducting connections
Made in corrosion-resistant materials
Mounts in any position on any flat surface
Low current draw
Packaged...
Marinco Nicro Vent 1000
The Marinco MiniVent 1000 is the smallest and most economical solar vent in the Nicro line. At just 7" in diameter and approximately 1-3/4" high, the MiniVent 1000 is compact yet effective.
The solar powered model is an exhaust vent only, but it will keep the boat cabin cool when you need it most - during the hot sunlight hours.
Under solar power the MiniVent 1000 will move 700 cubic feet of...
Plastic Mushroom Vent
Strong white plastic construction
with screwed metal spindle
Internal Diameter: 103mm
Overall Diameter: 150mm
Height when closed: 37mm
Dimension between Interior and Exterior Flanges: 37mm
4 x Fixing holes
Vetus Dartagnan Stainless Steel Mushroom Vent
Hugely popular Mushroom Deck Ventilator.
Made using AISI316 Stainless, polished to a high-gloss finish.
These vents will provide excellent ventilation, with the added security of a built-in dorade with mosquito screen.
Can be closed tight during adverse weather or deck washing.
Supplied with white plastic interior counter flange.
A/O Diameter: 185mm
Cut Out Diameter: 147mm
Deck...
Vetus Athos Stainless Steel Mushroom Vent
Hugely popular Mushroom Deck Ventilator.
Made using AISI316 Stainless, polished to a high-gloss finish.
These vents will provide excellent ventilation, with the added security of a built-in dorade with mosquito screen.
Can be closed tight during adverse weather or deck washing.
Supplied with white plastic interior counter flange.
A/O Diameter: 152mm
Cut Out Diameter: 122mm
Deck Thickness:...
Vetus Portos Stainless Steel Mushroom Vent
Hugely popular Mushroom Deck Ventilator.
Made using AISI316 Stainless, polished to a high-gloss finish.
These vents will provide excellent ventilation, with the added security of a built-in dorade with mosquito screen.
Can be closed tight during adverse weather or deck washing.
Supplied with white plastic interior counter flange.
A/O Diameter: 117mm
Cut Out Diameter: 85mm
Deck Thickness:...
Windscoop Ventilating Sail
The Windscoop Ventilating Sail puts an end to hot stuffy cabins and sleepless nights.
The Windscoop is aerodynamically designed to force the slightest breeze down into your cabin to keep you cool and comfortable.
All seams are double-stitched.
Two battens are sewn into place.
The versatile Windscoop can be hung from a halyard boom or a roller furling sheet.
Fits any hatch or companion-way up to...
Attwood 100mm (4") In Line Blower 12 V
atented in-line designProvides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners.CE certified.16-gauge, tinned and caulked copper wire leads.New improved design includes:Nickel-plated motor can for corrosion resistanceStiffening ribs to reduce housing distortionMotor cap to seal wires...
Flexible Air Ducting 75mm
Lightweight flexible PVC ducting hose encapsulating a spring helix suitable for bilge blowers and all non heated ventilation systems.
Temperature range 10°C to + 60°C. .
75mm ID
Colour may vary
Supplied by the metre
Stainless Steel Shell Vent 41mmx41mmx16mm
Stainless Steel Shell Vent
L44mm x W44mm x H16mm
Stainless Steel Shell Vent 57mmx54mmx16mm
Stainless Steel Shell Vent
L55mm x W55mm x H16mm
Stainless Steel Clam Shell Vent 170 x 148 x 57mm
Stainless Steel Shell Vent
Length 170mm - Width 148mm - Height 57mm
Stainless Steel Shell Vent 190 x 170mm x 72mm
Large Stainless Steel Clam Shell Vent
Size: L 190mm x W 170mm x H 72mm
Dimensions are inclusive of flange and fixings required.
Stainless Steel Louvered Vent 128x66mm
Stainless Steel Louvered Vent
Width: 128mmHeight: 66mm
Stainless Steel Louvered Vent 128x116mm
Stainless Steel Louvered Vent
Width: 128mmHeight: 116mm
Stainless Steel Louvered Vent 232x118mm
Stainless Steel Louvered Vent
Width: 232mmHeight: 118mm
Stainless Steel Louvered Vent 128 x 232mm
Stainless Steel Louvered Vent
Width: 127mmHeight: 232mm
Stainless Steel Slotted Vent - 6 Slot
Stainless Steel 6 Slot Vent
Cutput: 304mm x 52mm
Flange: 330mm x 79mm
Stainless Steel Slotted Vent - 8 Slot
Stainless Steel 8 Slot Vent
Cutout 405mm x 54mm
Flange 430mm x 78mm
Stainless Steel Slotted Vent - 5 Slot
Stainless Steel 5 Slot Vent
Cutout 304mm x 90mm
Flange 326mm x 114mm
Stainless Steel Round Buterfly Vent 102mm
Stainless Steel Buterfly Vent 102mm diameter with Centre knob.
Stainless Steel Round Buterfly Vent 127mm
Stainless Steel Buterfly Vent 127mm diameter with Centre knob.
Plastic Hose Vent Black 73mm
ABS Plastic Hose Vent 90mm x 90mm with a 73mmØ hose spigot
Plastic Hose Vent White 73mm
ABS White Plastic Hose Vent
90mm x 90mm overall with a 72mm Ø hose spigot suitable for bilge blowers and onboard ventilation.
Plastic Hose Vent Black 100mm
ABS Plastic Hose Vent 125mm x 125mm with a 100mmØ hose spigot
Plastic Hose Vent White 100mm
ABS White Plastic Hose Vent
125mm x 125mm overall with a 100mm Ø hose spigot suitable for bilge blowers and onboard ventilation.
Eberspacher Airtronic D2 12v 1 Outlet Marine Heating Kit (Modulator Control)
Eberspacher Airtronic D2 1 Outlet Boat Warm Air Heating System
We supply these Eberspacher boat heating systems as pre-packaged kits containing all the components required for on board installation, choose your voltage, choose the number of outlets/cabins you wish to serve and the rest is plain sailing.
The Airtronic diesel fired marine heating systems will keep your boat warm and cosy in any...
