Grid
List
Barton Marine 4:1 Boom Vang System
Upgrade your existing vang system or use as a boom preventer. Snap shackle fixings allow for quick and easy deployment. Professionally spliced and assembled.
Barton Marine Backstay Tensioner Block
Featuring laser-cut stainless steel side plates with precision turned brass sheaves. For use on twin or split backstays.
Barton Marine Boom Outhaul Kit
Marine Boom Outhaul Kit, 64mm Sheave Size 6 Pulley Block, 3.0m Length 26mm Drilled Track
Barton Marine Boomstrut Spare Part
Spare Parts - Pair 20mm X 1340mm Long Rods for 44040
Barton Marine Boomstrut With Webbing
Marine Boomstrut With Webbing Cradle Upto 25ft/7.5m & Folkboat Black
Barton Marine Lazy Jack Kit
Allow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.Ideal for use with fully battened or conventional mainsails, these complete kits contain stainless steel, plastic-coated wires with blocks and fixing eyes attached. High quality braided...
Barton Marine Mainsheet Recirculat
Mainsheet Recirculating System 3:1 Purchase, Size 1, 1
Barton Marine Mast Base Organiser
Marine Mast Base Organiser 4 Block, Black
Barton Marine Reefing Kit Up To 9
A boxed complete single-line reefing kit that allows reefing lines to be led aft to the safety of the cockpit. This system makes reefing your mainsail a quick and easy operation – just lower the main to a predetermined mark on the halyard, tension the reefing line and re-trim the sail. Supplied as a complete set with all the parts and fixings required, together with full fitting instructions. All...
Barton Marine Slab Reefing Kit - Spare Slider
Spare Slider for slab reefing system 41496 suitable for yachts up to 12 m/ 40 ft.
Barton Slab Reefing Kit Yacht up to 8.5m (28ft)
Slab Reefing Kit#
Barton Slab Reefing Kits are supplied with sliding blocks which are held in place with spring-loaded plungers allowing fine tuning for both cruising and racing.
Manufactured from stainless steel and 'Spectro' anodised aluminium.
Supplied with 60cm of 25mmanodised 'T' track
Barton Slab Reefing Kit yacht up to 12m (39ft)
Slab Reefing Kit
Barton Slab Reefing Kits are supplied with sliding blocks which are held in place with spring-loaded plungers allowing fine tuning for both cruising and racing.
Manufactured from stainless steel and 'Spectro' anodised aluminium.
Supplied with 100cm of 32mm anodised 'T' track
Barton Boomstrut 6 - 7.5 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing straightens...
Barton Boomstrut 7.5 - 9 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiency
The boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing...
Barton Boomstrut 9 - 10.5 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiency
The boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing straightens...
Barton Marine Boomstrut
The Folk Boat Boomstrut has a unique flexing action that responds to movement of the boom and provides constant support to prevent the boom from falling onto the deck.
Barton Mast Base Organiser
The Barton Mast Base Organiser is finished in 'Spectro' grey anodising for a long lasting finish. It accepts up to four double tang blocks mounted on individual stainless steel swivel posts, but with just three deck fixing points.
The unit is fitted close to the mast base to accept halyards, reefing lines and topping lift and is designed to work in conjunction with our range of deck organisers, rope...
Barton 41130 Single Line Reefing Kit
The Barton Single Line Reefing kit makes reefing your mainsail a quick and easy operation - just lower the main to a predetermined mark on the halyard, tension the reefing line and re-trim the sail. Suitable for boats up to 9 metres in length.
Supplied as boxed kit with all the parts and fixings required, together with full fitting instructions, all you need to provide is a line and a cleat or stopper.
Contents...
Barton Cascade Lightweight Lazy Jack Kit for yachts up to 10.5mtr
Barton Lazy Jack Kit allows mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.
Barton cascade lightweight lazy jack kit for yachts up to 10.5mtr
Ideal for use with fully battened or conventional mainsails, these complete kits contain...
Barton Lazy Jack Kit Yachts up to 9mtr
Lazy Jack KitsAllow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.
Barton Lightweight Lazy Jack Kit for yachts up to 9mtr
Barton lightweight lazy jack kit for yachts up to 9mtr.
Allow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom.
These lines can be slackened whilst sailing to avoid restricting sail shape.
Ideal for use with fully battened or conventional mainsails, these complete kits contain stainless steel, plastic-coated wires...
Barton Size 3 Drilled Mainsheet Track - To Clear
1.8mtr length of 30mm mainsheet track to clear, display marks and so not perfect with spectro grey anodised finish
Drilled mainsheet track constructed from aluminium, lightweight yet retains a high load capacity. The track is drilled and countersunk at 100mm centres, with the first hole at 50mm from the track end. A spectro grey anodised finish is extremely durable and offers friction free performance....
Barton Traveller 2:1 Purchase Kit Size 1
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)
Barton Traveller 2:1 Purchase Kit Size 2
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton Traveller 4:1 Purchase Kit Size 1
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton Traveller 4:1 Purchase Kit Size 2
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton 4:1 Purchase Kit Size1 Cleats on Traveller
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton 4:1 Purchase Kit Size2 Cleats on Traveller
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Wichard Boom Brake GybEasy
Wichard Boom Brake
Gybing remains one the of the most challenging operations of a sailing boat even for experienced sailors and could generate injuries and material damage.
An effecient and safe solution is the Gyb'Easy Wichard Boom Brake.
Components:
One Boom Brake
One Shackle attached to the boom brake and one to the boom saddles.
A specific line withstanding high frictions during the...