Grid
List
Blue Gee PVA Blue Release Agent 500ml
Blue Gee PVA Blue Release Agent is a water-soluable mould coating that aids the release of parts from a mould. Blue in colour to highlight spread, PVA Blue can be wiped clean after use with water.
PVA, or Polyvinyl Alcohol, can be applied to the iside of moulds with a brush or sponge which, when dry, forms a smooth surfaces ready for layering. Once parts are released from the mould PVA Blue can...
Blue Gee Polyester Resin 0.5Kg with MEKP Catalyst
Blue Gee Polyester Layup Resin 0.5kg
High quality Lloyds Approved marine resin for laminating and general repairs.
Catalyst at 2%.
Blue Gee Polyester Resin 1Kg with MEKP Catalyst
Blue Gee Polyester Layup Resin 1kg
A high quality polyester resin for laminating supplied with curing agent
Blue Gee Polyester Resin 2.5Kg with MEKP Catalyst
Blue Gee Polyester Layup Resin 2.5kg
A high quality polyester resin for laminating supplied with curing agent
Fibreglass Laminating Paddle Roller
High quality steel paddle roller designed for distributing resins to through heavy matt cloths.
Laminating Paddle Roller 21mm dia.
Roler Width: 50mm or 70mm
Plastic handle
Blue Gee Glassfibre Chopped Strand Mat 450g (0.92M x 1M)
Blue Gee
Glassfibre Chopped Strand Mat CSM(EB)
400g/Sq.M 0.92M x 1M
Blue Gee Glassfibre Fabric 200g (1m x 1m)
Glassfibre Fabric
Woven Fabric provides a lightweight yet strong laminate.
Woven fabric also allows for more flex and has higher impact resistance when compared to CSM.
For use with either Blue Gee fiberglass or epoxy resins.
Blue Gee Glassfibre Fabric 300g (1m x 1m)
Glassfibre Fabric
Woven Fabric provides a lightweight yet strong laminate.
Woven fabric also allows for more flex and has higher impact resistance when compared to CSM.
For use with either Blue Gee fiberglass or epoxy resins.
Blue Gee Glassfibre Tape 25mm x 10mtr
25mm x 10mtr Wide Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy
Blue Gee Glassfibre Tape 25mm x 50mtr
25mm x 50mtr Wide Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy
Blue Gee Glassfibre Tape 50mm x 10mtr
50mm x 10mtr Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Glassfibre Tape 50mm x 50mtr
50mm x 50mtr Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Glassfibre Tape 75mm x 10mtr
75mm x 10mtr Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Glassfibre Tape 75mm x 50mtr
75mm x 50mtr Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Glassfibre Tape 100mm x 10mtr
100mm x 10mtr Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Glassfibre Tape 100mm x 50mtr
100mmm x 50mtr Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Gelcoat Kit 100g
Blue Gee Gelcoat Kit
Our popular Clear Gelcoat kit containing everything needed for your surface repair.
Ideal for scratches, dings and small repairs.
The Kit includes:• 100g Clear Pre-Waxed Gelcoat• 8g Catalyst• Thickening Powder• 1 x Small Mixing Stick• 1 x 30ml Mixing pot
Blue Gee Colourmatch Mix/Store Kit
Use for mixing the pigments in the Colourmatch kits and then keep the pre-mixed colour for future use.
Blue Gee Colourmatch Store Kit
1 x Mixing pot with lid
1 x Spatula
3 x Pots
Blue Gee Colourmatch Pigments 20g
1 x 20g Pot of Blue Gee Colourmatch Pigment
A wide range of shades allows you to colour your gelcoat, resin or epoxy.
Blue Gee colour charts are available, please visit www.bluegee.co.uk.
Please call us on 01375 374702 if there is a colour required as there too many availiable to list
Blue Gee Colourmatch Pigments 3x20g
3 x 20g Pots of Blue Gee Colourmatch Pigment
A wide range of shades allows your to colour your gelcoat, resin or epoxy.
Blue Gee colour charts are available, please visit www.bluegee.co.uk.
Blue Gee Pure Acetone 500ml
Pure acetone is essential for completing any job, from use in surface preparation providing a good working surface, to cleaning your tools after the job is complete.
Size 500ml
Blue Gee Pure Acetone 1ltr
Pure acetone is essential for completing any job., from use in surface preparation providing a good working surface, to cleaning your tools after the job is complete.
Size: 1Ltr
25mm White Bristle Brush
25mm white bristle brush suitable for laminating, applying gelcoat and all polyester and epoxy resins.
Also suitable for antifouling but not topside paints.
50mm White Bristle Brush
50mm white bristle brush suitable for laminating, applying gelcoat and all polyester and epoxy resins.
Also suitable for antifouling but not topside paints.
Teroson Gelcoat Filler 241gm
Gelcoat filler is a white, waterproof gelcoat filler for surface repairs. It is paintable, easy to mix, apply, shape and sand and can be pigmented or painted with any marine paint.
Waterproof but paintable
Easy to mix, apply, shape and sand
Can be pigmented or painted with any marine paint
Use with glass-fibre Mat for structural repairs to GRP
Can be used on glass-fibre or gelcoat
Tolerates...
Teroson Marine Filler 341gm
Marine Filler is a super smooth polyester filler
Two-part, polyester paste, suitable for filling and sealing large holes and cracks in hull materials such as GRP, steel aluminium and wood.If used below the waterline, it must be over coated with Gelcoat Filler or painted.
Paint-compatible.
Sets in 10 min.
Can be machined, drilled, tapped and polished in further 10 min.
341gm tub
Teroson Glass Fibre Filler 332gm
Teroson Glass Fibre Filler bridges holes and scratches on glass fibre, metals and wood, is easy to use and sets in approximately 10 minutes.
Once set it can be sanded flush and painted over.
The kit comprises of:
Glass fibre filler
Glass fibre hardener
Application tool
Application guidance sheet
332gm Tub
Teroson Chemical Metal 321gm
Teroson Chemical Metal is a two part polyester based general purpose filler.
Permanently repairs, strengthens, joins and fills virtually any material.
Sets hard throughout in just 20 minutes.
Can be sanded, machined, drilled, tapped and polished.
Resistant to water, oil and petrol.
Junior Tin 321gm
International Watertite Epoxy Filler - 250ml
International Watertite
A quick-drying epoxy filler for long lasting repairs to small areas on suitably primed GRP, metals and rigid wood constructions.
Its key benefit is a fast curing time, excellent for filling small areas quickly and so ideal for the DIY yachtsman.
This super–smooth 2-pack formulation has a matt blue finish and can be used on areas above or below the waterline to fill holes...
International Watertite Epoxy Filler - 1 Litre
International Watertite
A quick-drying epoxy filler for long lasting repairs to small areas on suitably primed GRP, metals and rigid wood constructions.
Its key benefit is a fast curing time, excellent for filling small areas quickly and so ideal for the DIY yachtsman.
This super–smooth 2-pack formulation has a matt blue finish and can be used on areas above or below the waterline to fill holes...
Hempel 130ml Epoxy Filler
A two component, solvent free, epoxy filler, for use for a variety of filling and fairing jobs both above and below the waterline.
Can be applied in thick coats up to approximately 5mm without runs or sags.
Fair before overcoating with relevant primer.
130ml 2 Part
Captain Tolley's Creeping Crack Cure
Capt Tolley's Creeping Crack Cure is a penetrating co-polymer sealant by the infamous Capt Tolley which is formulated to be so thin that by using capillary action it can find its way INSIDE fine cracks and set to a CLEAR flexible seal.
Use for leaking windows, portlights, decks, coachroofs, deck houses, etc., cracked planks, centreboard casings, around all deck fittings, skin fittings, plumbing, trim...
Bostik 1 litre Bostik NE486 + hardener
1 litre Bostik NE486 + hardener, Translucent
Bostik 250 ml + 10 ml Bostik 2402 + Hardener
250 ml + 10 ml Bostik 2402 + Hardener, Transparent
Bostik 5 litre Bostik NE486 + hardener
5 litre Bostik NE486 + hardener, Translucent
Bostik Bostik Marocol PU 2D480 : 1.17 kg hardener 4300
Bostik Mrocol PU 2D480 solvent free thixotropic 2-component polyurethane construction adhesive : Bostik Marocol Hardener : 1.17 kg hardener 4300 Marocol PU 2D480 is developed for structural bonding of (artificial) teak to deck. Due to its long open time, it is very suitable to bond large surfaces in one time. Solvent free. Long open time of 120 minutes. Easy and fast application. High gap filling....
Bostik l litre Bostik 2402 + Hardener - 1ltr - Transparent
l litre Bostik 2402 + Hardener, Transparent
Bostik l litre Bostik 2402 + Hardener - 5ltr - Transparent
5 litre Bostik 2402 + Hardener, Transparent
Bostik MSR Xtreme Construction Adhesive - ml
Bostik Xtreme is the new Sealer standard for Marine. Xtreme Workability - Low Gunability, Primerless, and Isocyanate free. Xtreme Durability - Resistance against marine cleaners, high UV and saltwater resistance and high resistance against discolouring. Xtreme Versatility - Can be used as an adhesive, useable on both interior and exterior, and excellent adhesion on many substrates (metal, wood, glass...
Bostik Simson Cleaner 9 - 5 Litre
Simson Cleaner 9 is a preparation agent, ideally suitable for cleaning and degreasing substrates for bonding or sealing with specific Simson products Cleaning and degreasing of ceramic coated glass. Cleaning and degreasing of plastic. Cleaning and degreasing of closed substrates (consult Bostik for more information). . . . . . . . .
Bostik Simson Cleaner E - 500ml
Simson Cleaner E is a preparation agent, ideally suitable for cleaning and degreasing substrates for bonding or sealing with specific Simson products Cleaning and degreasing of teakwood decks (prior to the application of Simson Prep P). Removing uncured sealant and adhesive, based on Silyl Modified Polymer (SMP), silicones, polysulphide and polyurethane from substrates and tools. Degreasing and cleaning...
Bostik Simson Finishing Soap - 1ltr
Simson Finishing Soap is a mixture of special tensides. This product is ideal for finishing and tooling sealant joints. Any danger of yellowing/discolouration of sealant joints, that may occur while using standard soap suds is not possible with Simson Finishing Soap because of the absence of colouring- and preserving agents. (NB tensides are water soluble substances that influence the surface tension...
Bostik Simson MSR Bedding Compound : 600 ml,
MSR Bedding Compound is a 1-component, permanently elastic, fast curing adhesive/sealant , based on Silyl Modified Polymer (SMP). MSR Bedding Compound has been tested and certified to the International Maritime Organisation fire test procedures for surface flammability, resolution A.653 (16) and has been approved for use in wall, ceiling and floor applications. Solvent and isocyanate free. Permanently...
Bostik Simson MSR Construction Adhesive SSKF : ml,
Simson MSR construction adhesive SSKF is a 1-component, permanently elastic, fast curing construction adhesive, based on Silyl Modified Polymer (SMP). It is the longer open time version of the MSR Construction Adhesive. This product has been developed for bonding and sealing applications in the yacht and boat building industry. MSR Construction Adhesive SSKF has been tested and certified to the International...
Bostik Simson MSR Deck Caulk Advanced : ml, Black
Product Overview
Simson MSR Deck Caulk Advanced is a 1-component, permanently elastic, fast curing sealant, based on Silyl Modified Polymer (SMP). Simson MSR Deck Caulk Advanced has excellent chemical, UV and heat resistance.
Solvent- and isocyanate free
Very good UV-resistance and ageing properties; long time resistance against fresh and salt water
Permanently elastic in a temperature...
Bostik Simson MSR Fast Tack : 290 ml, Black
Simson MSR Fast Tack is a permanently elastic, 1-component adhesive based on Silyl Modified Polymer (SMP) with a high green strength, an excellent UV stability and fresh and salt water resistance. MSR Fast Tack has been tested and certified to the International Maritime Organisation fire test procedures for surface flammability, resolution A.653 (16) and has been approved for use in wall, ceiling and...
Bostik Simson MSR Fast Tack : 600 ml, Black
Simson MSR Fast Tack is a permanently elastic, 1-component adhesive based on Silyl Modified Polymer (SMP) with a high green strength, an excellent UV stability and fresh and salt water resistance. MSR Fast Tack has been tested and certified to the International Maritime Organisation fire test procedures for surface flammability, resolution A.653 (16) and has been approved for use in wall, ceiling and...
Bostik Vinycol 1520 10L
Bostik Vinycol 1520 M2 + Hardener is an adhesive that is specifically designed for the bonding of synthetic materials. Due to its resistance against plasticizer, Vinycol 1520 + M2 Hardener is suitable for bonding flexible PVC. Suitable for bonding coated (soft) PVC or polyurethane materials (inflatable boats, strip conveyor, etc.). Suitable for bonding Neoprene/Hypalon materials and possible repairs....
