Resins & Fillers
West System A Pack Epoxy Resin + Hardener 1.2KG
The West System A Pack is a combined 1.2kg pack of epoxy resin with a choice of either the 205 Fast or 206 Slow curing hardener, It is recommended to use the calibrated pump sets to achieve correct mixing proportions and maintain the maximum cured strength.
Pot life at 25°C: 10 to 15 minutes
Cure to solid state at 21°C: 5 to 7 hours
Cure to maximum strength at 21°C: 5 to 7 days
Minimum...
West System 301A Pump Set 5:1 For A Pack
West System 301A Pump Set
Specially designed for convenient and accurate dispensing of WEST SYSTEM 105 Resin and 205 or 206 Hardeners.
The pumps mount directly on the resin and hardener containers and have been calibrated to deliver the correct working ratio of 5 parts by volume of resin to 1 part by volume of hardener with one stroke from each pump
WARNING: DO NOT USE 301 MINI...
West System B Pack Epoxy Resin + Hardener 6kg
The West System B Pack is a combined 6kg pack of epoxy resin with a choice of either the 205 Fast or 206 Slow curing hardener, It is recommended to use the calibrated pump sets to achieve correct mixing proportions and maintain the maximum cured strength.
Pot life at 25°C: 10 to 15 minutes
Cure to solid state at 21°C: 5 to 7 hours
Cure to maximum strength at 21°C: 5 to 7 days
Minimum...
West System 301B Pump Set 5:1 For B Pack
West System 301B Pump Set
Specially designed for convenient and accurate dispensing of WEST SYSTEM 105 Resin and 205 or 206 Hardeners.
The pumps mount directly on the resin and hardener containers and have been calibrated to deliver the correct working ratio of 5 parts by volume of resin to 1 part by volume of hardener with one stroke from each pump.
WARNING: DO NOT USE 301 MINI PUMPS...
West System 403 Microfibres 160gm
A blend of cellulose cotton fibres used as a thickening additive for bonding applications, to create a multi-purpose adhesive with excellent gap filling properties. Epoxy thickened with microfibers provides good wetting out of the substances and excellent gap-filling properties.
Add 4% to 16% by weight to West SystemsSystem epoxy mix.
Fillers have been designed to modify the Resin/Hardener mix for...
West System 405 Filleting Blend Filler 150gm
405 Filleting Blend Filler 150gm
Consists of a mix of cellulose fibres and other fillers for use in filleting applications when a naturally finished interior is intended.
Alcohol or water based stains may be added to adjust the colour. Add 15% to 25% of Filleting Blend by weight.
Colour: Tan
West System 406 Colloidal Silica Filler 60gm
406 Colloidal Silica 60gm
General purpose thickening additive suitable for bonding, gap-filling and filleting.
406 can be used to prevent resin flow on vertical and overhead surfaces and to control the viscosity of the epoxy.
Add 3% to 8% by weight to the resin/hardener mix.
Colour: Off-White.
West System 410 Microlight Filler 50gm
410 Microlight Filler 50gm
This low density filler is ideal for creating a lightweight, easily worked fairing compound, especially suited for large areas.
Microlight holds a fantastic feather edge and is the easiest filler throughout the West System range to fair.
Add between 7% to 16% by weight to mixed epoxy.
Colour: Tan
West System Epoxy Resin Mini Pack 101
The West System epoxy mini pack 101 contains a selected mix of materials used to complete smaller repairs around the boat, in the workshop or at home.
Contents include: 250g 105 Resin, 50g 205 Hardener, 403 & 407 fillers, dispensing syringes, application tools, gloves and instructions.
West System Epoxy 104 Junior Pack
The West System 104 Junior Pack
contains:
WEST SYSTEM 104 Junior Pack is a 600g pack of West System epoxy (105-205).
WEST SYSTEM 104 Junior Pack is designed for the small user or a refill for the Handy Repair Pack.
West System Epoxy 105-K Fiberglass Boat Repair Kit
The West System Epoxy 105-K Glass Fibre Boat Repair Kit
Contains:
250g 105 Epoxy Resin®
50g 205 Fast Hardener®
402 Milled Glass Fibre Blend
409 Microsphere Blend
3x mixing cups
1x reusable mixing stick
2 pairs of nitrile gloves
2x glue brushes
2x syringes
1m x 125mm 450g/m² biaxial glass tape
1m x 75mm 175g/m² plain weave glass tape
1m x 100mm peel ply
West System G5 Rapid Adhesive 200grm
West System G5 rapid is an easy to use two part fast setting resin/hardener system.
This adhesive is ideal for quick repairs and general bonding around the boat and in the home the workshop or garage.
It is suited for spot applications to hold component parts in position whilst bonding is completed with WEST SYSTEM epoxy.
G5 will adhere to most prepared surfaces including wood fibreglass and...
West System SIX10 Adhesive
SIX10 Adhesive combines strength and reliability of a two-part west system epoxy with a simple sealant type application.
The self-metering coaxial cartridge dispenses a gap filling structural epoxy that bonds tenaciously to wood, metals, GRP and concrete. The tube is supplied with a static mixer taht lets you lay down a bead of thickened epoxy with any standard caulking gun.
Size: 190ml
West System SIX10 Static Mixer Nozzle Pack of 2
Sold as a pack of 2
Plastic Padding Gelcoat Filler
Gelcoat filler is a white, waterproof gelcoat filler for surface repairs. It is paintable, easy to mix, apply, shape and sand and can be pigmented or painted with any marine paint.
Use with glass-fibre Mat for structural repairs to GRP and can be used on glass-fibre or gelcoat.
It has a working time of 8 min and a curing time of 20 min.
Can tolerate temperatures up to +160°C
Waterproof...
Plastic Padding Marine Epoxy
Plastic Padding
Marine Epoxy Filler is two part filler, fast setting epoxy suitable for repairing holes and scratches above and below the waterline.
Marine Epoxy is also suitable for repairing small osmosis holes and can be sanded and painted over.
Plastic Padding Marine Filler 180 ml Tub
Plastic Padding Marine Filler
Two-part, polyester paste.Suitable for filling and sealing large holes and cracks in hull materials such as GRP, steel aluminium and wood.If used below the waterline, it must be over-painted with Gelcoat Filler or painted.
Paint-compatible.
Sets in 10 min.
Can be machined, drilled, tapped and polished in further 10 min.
Plastic Padding Glass Fibre Filler 180ml
This Plastic Padding Glass Fibre kit bridges holes and scratches on glass fibre, metals and woods.
The kit is easy to use and sets in approximately 10 minutes.
Once set it can be sanded flush and painted over.
The kit comprises of:
Glass fibre filler
Glass fibre hardener
Application tool
Application guidance sheet
165g tube.
Plastic Padding Chemical Metal 180 ml Tub
Plastic Padding Chemical metal permanently repairs, strengthens, joins and fills virtually any material.
Sets hard throughout in just 20 minutes.
Can be sanded, machined, drilled, tapped and polished.
Resistant to water, oil and petrol.
Blue Gee Hand Cleaner
Blue Gee hand cleaning agent to remove liquid resins and paints from skin.
800g Tub
Blue Gee Polyester Resin 0.5Kg with MEKP Catalyst
Blue Gee Polyester Layup Resin 0.5kg
High quality Lloyds Approved marine resin for laminating and general repairs.
Catalyst at 2%.
Blue Gee Polyester Resin 1Kg with MEKP Catalyst
Blue Gee Polyester Layup Resin 1kg
A high quality polyester resin for laminating supplied with curing agent
Blue Gee Polyester Resin 2.5Kg with MEKP Catalyst
Blue Gee Polyester Layup Resin 2.5kg
A high quality polyester resin for laminating supplied with curing agent
Blue Gee Glassfibre Chopped Strand Mat 450g (0.92M x 1M)
Blue Gee
Glassfibre Chopped Strand Mat CSM(EB)
400g/Sq.M 0.92M x 1M
Blue Gee Glassfibre Fabric 200g (1m x 1m)
Glassfibre Fabric
Woven Fabric provides a lightweight yet strong laminate.
Woven fabric also allows for more flex and has higher impact resistance when compared to CSM.
For use with either Blue Gee fiberglass or epoxy resins.
Blue Gee Glassfibre Fabric 300g (1m x 1m)
Glassfibre Fabric
Woven Fabric provides a lightweight yet strong laminate.
Woven fabric also allows for more flex and has higher impact resistance when compared to CSM.
For use with either Blue Gee fiberglass or epoxy resins.
Blue Gee Glassfibre Tape 50mm x 50mtr
Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Glassfibre Tape 50mm x 1mtr
Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Glassfibre Tape 75mm x 50mtr
Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Glassfibre Tape 75mm x 1mtr
Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Glassfibre Tape 100mm x 50mtr
Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Glassfibre Tape 100mm x 1mtr
Glassfibre Tape
Easy to handle.
Used to reinforce seams, joints and corners or for small repairs.
For use with either Blue Gee Polyester fiberglass resins or Epoxy.
Blue Gee Gelcoat Kit 100g
Blue Gee Gelcoat Kit
Our popular Clear Gelcoat kit containing everything needed for your surface repair.
Ideal for scratches, dings and small repairs.
The Kit includes:• 100g Clear Pre-Waxed Gelcoat• 8g Catalyst• Thickening Powder• 1 x Small Mixing Stick• 1 x 30ml Mixing pot
Blue Gee Colourmatch Pigment 20g - Super White
Colourmatch Pigment
A wide range of shades to colour your gelcoat, resin or epoxy.
Blue Gee colour charts are available, please visit www.bluegee.co.uk.
Blue Gee Colourmatch Pigments 3x20g
Colourmatch Pigment
A wide range of shades to colour your gelcoat, resin or epoxy.
Blue Gee colour charts are available, please visit www.bluegee.co.uk.
Blue Gee Pure Acetone 500ml
Pure acetone is essential for completing any job, from use in surface preparation providing a good working surface, to cleaning your tools after the job is complete.
Size 500ml
Blue Gee Pure Acetone 1ltr
Pure acetone is essential for completing any job., from use in surface preparation providing a good working surface, to cleaning your tools after the job is complete.
Size: 1Ltr
Laminating Brush 25mm
Laminating brush suitable for applying Gelcoat and all polyester and Epoxy resin
Laminating Brush 50mm
Laminating brush suitable for applying Gelcoat and all polyester and Epoxy resin
Captain Tolley's Creeping Crack Cure
Capt Tolley's Creeping Crack Cure is a penetrating co-polymer sealant by the infamous Capt Tolley which is formulated to be so thin that by using capillary action it can find its way INSIDE fine cracks and set to a CLEAR flexible seal.
Use for leaking windows, portlights, decks, coachroofs, deck houses, etc., cracked planks, centreboard casings, around all deck fittings, skin fittings, plumbing,...
International Watertite Epoxy Filler - 250ml
International Watertite
A quick-drying epoxy filler for long lasting repairs to small areas on suitably primed GRP, metals and rigid wood constructions.
Its key benefit is a fast curing time, excellent for filling small areas quickly and so ideal for the DIY yachtsman.
This super–smooth 2-pack formulation has a matt blue finish and can be used on areas above or below the waterline to fill...
International Watertite Epoxy Filler - 1 Litre
International Watertite
A quick-drying epoxy filler for long lasting repairs to small areas on suitably primed GRP, metals and rigid wood constructions.
Its key benefit is a fast curing time, excellent for filling small areas quickly and so ideal for the DIY yachtsman.
This super–smooth 2-pack formulation has a matt blue finish and can be used on areas above or below the waterline to fill...
