Best Selling

Jaw opening of 25mm add internal dimensions of 25mm x 29mm. Designed for use over forestay systems for storm jibs, not for large genoas.

Valco Snap For Swobbit Pole Replacement push button attachment clip for the Swobbit Perfect Poles. Valco Clips are Stainless Steel and are used to make push button for telescopic poles. Will fit tubing diameters from 3/4" to 1.25".

T-Piece Rowlock Pin with Thread Quicksilver, Waveline, Wetline, XM

Talamex Microfiber Wash Mitt Microfiber wash mitt for cleaning of boats, cars, caravans etc. The microfiber mitt is perfect for dry or wet cleaning and is also suitable to polish larger surfaces. Size: 23 x 17cm Coral fleece 100% polyester Colour may vary

The new Floating Winch Handles are moulded in durable Glass Reinforced Plastic with a fast, free movement ball bearing system. Should they fall overboard, they will remain afloat until its recovered.

200Ah 12V Lithium Iron Phosphate Battery with Heating & 300A BMS for various applications.

This 2kW 12V TBB Power kinergier mobile inverter charger is a versatile bi-directional inverter designed for mobile applications. Whether in an RV, marine vessel, or utility vehicle.

TBB Power 20A DC to DC battery charger for fast charging of a 12V battery / battery bank from another 12V battery / battery bank with its own energy source.

TBB Power high efficiency 30A MPPT solar charge controller with in-built Bluetooth for solar panels up to 500W (12V battery system) / 1000W (24V battery system) up to 100V. Supports Lithium battery charging.

TBB Power 45A DC to DC battery charger for fast charging of a 12V battery / battery bank from another 12V battery / battery bank with its own energy source.

The TBB-DTU is a compact and easy-to-install Bluetooth communication module designed for seamless wireless monitoring of TBB-M series lithium batteries.

The TBB-ELINK module provides reliable, real-time data transmission and access to historical records for TBB systems.

The TBB-MCK is an advanced remote monitoring and control device, it provides real-time status updates, system performance monitoring, and error diagnostics to enhance user convenience and system management.

The 12V Battery Protect Relay 500A is a smart high-current magnetic latching contactor, that can handle continuous DC currents of up to 500Amps. The contactor can easily be installed in an engine room or battery compartment while being controlled from a more convenient location by a small panel-mounted switch.

The Advanced Remote Control allows the user to monitor status and perform unit settings remotely from your TBS inverter, charger or combination inverter/charger.

The Basic Charger Remote Control allows the user to monitor status and perform unit settings remotely.

The Basic Inverter Remote Control allows the user to monitor status and perform unit settings remotely.

The DCM 1xM8 Single Stud (50V) (Set of 2pcs) is used to extend cables, add power taps or form termination end-points. The solid and compact design, as well as the possibility to link these up with other DC Modular family members, make these products the best choice for all professional DC power systems.

The DCM 2xM8 Dual Stud (50V) is used to extend cables, add power taps or form termination end-points. The solid and compact design, as well as the possibility to link these up with other DC Modular family members, make these products the best choice for all professional DC power systems.

The DCM 3xM8 Busbar (50V/600A) is used to distribute high DC currents to a number of connected cables, or other DC Modular family members. The solid and compact design, as well as the possibility to link up multiple busbars on a fixed grid, make these products the best choice for all professional DC power systems. The high current busbars are available with M8 or M10 stud sizes.

The DCM 5xM8 Busbar (50V/600A) is used to distribute high DC currents to a number of connected cables, or other DC Modular family members. The solid and compact design, as well as the possibility to link up multiple busbars on a fixed grid, make these products the best choice for all professional DC power systems. The high current busbars are available with M8 or M10 stud sizes.

The solid and compact design, as well as the possibility to link up multiple fuseholders on a fixed grid, make the DCM ANL Fuseholder (50V/35..300A) (for M10 fuse) one of the best choices for all professional DC power systems. It's features include: - Stainless steel studs, nuts and washers for optimal corrosion resistance - Tin plated high purity copper busses provide maximum conductivity, reducing heat and improving efficiency - Special fiber reinforced base material offers excellent high temperature properties, good chemical resistance and high strength - Unique grid optimized footprints allow space saving arrangements of multiple products - Common interconnection heights for easy combining of multiple products using link plates (except Mega and ANL (300A) fuseholders) - Robust transparent covers with breakouts to allow wire access from any direction - Smart terminal design allows dual mirrored cable lug connections - Easy in-system connection access due to top locked covers (except Mega and ANL (300A) fuseholders)

The solid and compact design, as well as the possibility to link up multiple fuseholders on a fixed grid, make the DCM ANL Fuseholder (50V/35..600A) (for M10 fuse) one of the best choices for all professional DC power systems. It's features include: - Stainless steel studs, nuts and washers for optimal corrosion resistance - Tin plated high purity copper busses provide maximum conductivity, reducing heat and improving efficiency - Special fiber reinforced base material offers excellent high temperature properties, good chemical resistance and high strength - Unique grid optimized footprints allow space saving arrangements of multiple products - Common interconnection heights for easy combining of multiple products using link plates (except Mega and ANL (300A) fuseholders) - Robust transparent covers with breakouts to allow wire access from any direction - Smart terminal design allows dual mirrored cable lug connections - Easy in-system connection access due to top locked covers (except Mega and ANL (300A) fuseholders)

The solid and compact design, as well as the possibility to link up multiple fuseholders on a fixed grid, make the DCM Class-T Fuseholder (50V/225..400A) one of the best choices for all professional DC power systems. It's features include: - Stainless steel studs, nuts and washers for optimal corrosion resistance - Tin plated high purity copper busses provide maximum conductivity, reducing heat and improving efficiency - Special fiber reinforced base material offers excellent high temperature properties, good chemical resistance and high strength - Unique grid optimized footprints allow space saving arrangements of multiple products - Common interconnection heights for easy combining of multiple products using link plates (except Mega and ANL (300A) fuseholders) - Robust transparent covers with breakouts to allow wire access from any direction - Smart terminal design allows dual mirrored cable lug connections - Easy in-system connection access due to top locked covers (except Mega and ANL (300A) fuseholders)