Jabsco CW462 Maxi-System 2.9 Pressure System 25PSI 12v
login to saveProduct Description
Jabsco CW462
In addition to the pump itself, pressurised water systems require an inlet strainer and a pressure reservoir (accumulator tank) for smooth, reliable operation. The MAXI-SYSTEM 2.9 combines them all in one compact unit.
No time-consuming assembly work – just 3 mounting screws, 2 electrical leads and 2 pipe connections……and the job’s done. MAXI-SYSTEM 2.9 offers savings all-round!
- Jabsco’s 2.9 pump: powerful, very quiet and inexpensive
- Ultra-simple to install, using 15mm Hep20 push-fit pipework
- Pressure switch cuts in at 15 psi, out at 25 psi
- Ample flow for up to 3 outlets in smaller boats
Technical Specification
- Connections: - for 15mm HEP2O pipe work
- Dimensions: - 320mm long, 276mm wide, 140mm high
- Fuse Size: - 10 amp
- Maximum Current: - 4 amp
- Output: - 11 litres/minute (2.4 gallons/minute) open flow
- Pressure Switch: cuts in at 1bar (15psi) - cuts out at 1.7bar (25psi)
- Pre-assembled and tested for quick and simple installation in small/medium sized boats: serves up to 3 outlets
- 3 screws, 2 HEP2O water connections, 2 wires - and the installation is complete!
- Based on JABSCO 31395-series self-priming pump
- Includes 2 litre accumulator tank and inlet strainer
- All mounted on stainless steel base
Collect in Store
This item is available for collection.
You may also like...
People who bought this also bought...
