Search results for... Battery switch

The TH Series Time Delay Relay, 200 A includes: - Ultra-Low Power Draw Compare to typical ACRs (7-10 mA) vs 7610 ACR @ 1.3 mA, will not deplete batteries even after extended electrical system downtime. - Simple & Robust Installation: Integrated sealed plug eliminates corrosion, includes Deutsch/Amphenol DTM connector harness - Start Assist input option to ensure maximum cranking amps available by allowing manually connecting of batteries via remote switch. - Bullet-proof Construction: Sealed unit, stainless steel hardware, high temperature materials allow mounting anywhere. Integrated thermal overload shutdown protection.

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option.

The Merlin DC-DC Charger 30A 24V was designed as an easy to install solution to Smart Regenerative Charging Systems (SRCS). The unit acts like a battery charger, however it uses DC power instead of AC power. It provides the ability to charge batteries from two input sources; ether via a PV solar panel(s) when stationary or via from the engine/alternator while driving.

Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation). Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Three stage charging, with temperature compensation. Three outputs that each can supply the full output current. All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz. Dimensions (HxWxD): 35.5x21.5x11.0 cm / Weight: 3.8 kg.

Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation). Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Three stage charging, with temperature compensation. Three outputs that each can supply the full output current. All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz. Dimensions (HxWxD): 42.6x23.9x13.5 cm / Weight: 5 kg.

Designed to meet the requirements of both CE for Europe and UL for the United States, the Centaur model range features auto-ranging input covering 90-265VAC 50/60Hz input meaning they can be used anywhere in the world. Crucially, and unlike other products that state universal input, the Centaur range will maintain full output power within the entire specified range. The Centaur model will also work on 90-400VDC input, making it a perfect Charging DC-DC Converter in a Diesel Electric system.

Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation). Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Three stage charging, with temperature compensation. Three outputs that each can supply the full output current. All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz. Dimensions (HxWxD): 42.6x23.9x13.5 cm / Weight: 5 kg.

Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation). Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Three stage charging, with temperature compensation. Three outputs that each can supply the full output current. All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz. Dimensions (HxWxD): 50.5x25.5x13.0 cm / Weight: 12 kg.

The Powersine Combi 2000-12-80 is designed for critical use applications where absolute reliability and outstanding performance is required to ensure mission success.

The Powersine Combi 1800-24-35 is designed for critical use applications where absolute reliability and outstanding performance is required to ensure mission success.

The Powersine Combi 1600-12-60 is designed for critical use applications where absolute reliability and outstanding performance is required to ensure mission success.

The new generation of MFS8C/9.9CY(W) model lineup is engineered to be EFI (Electronic Fuel Injection) for the first time in 200cc class. The battery-less EFI (Electronic Fuel Injection) model is the lightest 2-cylinder 8/9.9 hp on the market, with upgraded features from its predecessor. In addition to upgrading this model to EFI (Electronic Fuel Injection), Tohatsu has applied various key features.

AIS Deploy is a portable, self contained, highly rugged Class A AIS transponder system supplied with GPS and VHF antennas and an integrated 12v DC rechargeable battery. In addition to the Class A dedicated controller (MKD), it features a wireless interface to allow tablets and iPads to display data on a wide range of compatible apps.

The BlueSolar PWM Light Charge Controller features a programable load output with lighting control mode and three stage battery charging.

Delivering up to an impressive 292wh per day, the 45w PV Logic solar panel can charge an 85Ah lead acid battery to more than 50% on a sunny summer's day in the UK. 

The BlueSolar PWM Light Charge Controller features a programable load output with lighting control mode and three stage battery charging.

Built with an intuitive, easy-to-use design, this Riptide Transom model delivers pounds of power and precision manoeuvrability. With the battery-extending power of Digital Maximizer (when included) and unmatched corrosion protection, Riptide Transom means fish are out of places to hide.

Brand new 5m twin core solar extension cable(4.0mm cross section) with 50A battery plugs for 80-150W folding solar charging kits

UPS battery back-up system for applications requiring a constant, uninterrupted power supply. Includes 2 x 5000W 48V hybrid inverters, 8 x 200Ah gel deep-cycle batteries and connection cables.

This 10w PV Logic solar panel roof and deck top kit enables the solar panel to be professionally fitted to the roof of a caravan, motorhome, or yacht. Great for small power consumption projects such as keeping the lights on in a campervan. The 10w PV Logic solar panel delivers a continuous trickle feed maintaining and extending the life of any 12-volt battery and delivers up to 65wh per day. Fitted with a blocking diode to prevent reverse current drain, the kit includes all you need to fit the panel including a cable feed gland, bonding agent, a 4m cable, connectors, fuse and detailed installation instructions. NOTE – The 10w panel kit does not require a charge controller if the battery to be used is larger than 75Ah.

The 10w PV Logic flexi solar panel is great for small power consumption projects as diverse as powering electric fences to keeping the lights on in a trailer tent. The panel delivers a continuous trickle feed maintaining and extending the life of any 12-volt battery and delivers up to 65wh per day. The 10w panel is supplied with a 4m cable, connectors, fuse and detailed installation instructions. NOTE – The 10w panel kit does not require a charge controller if the battery to be used is larger than 75Ah.

The 5w PV Logic flexi solar panel is the ideal choice to provide a continuous trickle feed maintaining and extending the life of any 12-volt battery and delivers up to 32.5wh per day. The 5w panel is supplied with a 4m cable, connectors, fuse and detailed installation instructions. NOTE – The 5w panel kit does not require a charge controller if the battery to be used is larger than 35Ah.

The Qlink 2ch Alarm Expander Kit adds enable you to control, readout and configure the Expert Modular battery monitor and Omnicharge2 battery chargers from your Windows PC running Dashboard 2.

SmartBank PRO 200/12/2 EURO6 Version is the most advanced stand-alone split charging device available. Utilising industry-accepted "best method" split charging, SmartBank PRO introduces no voltage drop, does not force feed batteries, and allows capacity sharing between battery banks to stretch battery run-times to the max.