Winch Handles & Accessories

Lemar Winch Handle Pocket Size as below External: Width @ Top             95mm Width @ Botton         74mm Depth                        56mm Height                       255mm Internal: Width @ Top (narrowest point)  ...

Lewmar Alloy Winch Handle For maximum efficiency all Lewmar winch handles have ball bearings. The 250mm /10' is for heavier loads and produces the maximum power ratio for the winch.

Lewmar OneTouch The Lewmar OneTouch Winch Handle is a new approach to winch handle design. Its patented 'OneTouch' mechanism allows you to squeeze the releaselever (which runs the entire length of the handle) and pull to unlock in one quick, easy motion. To lock-in, simply squeeze and insert into winch. All it takes is one hand. So you can spend less time fiddling around and more time sailing.

Lewmar OneTouch The Lewmar OneTouch Winch Handle is a new approach to winch handle design. Its patented 'OneTouch' mechanism allows you to squeeze the releaselever (which runs the entire length of the handle) and pull to unlock in one quick, easy motion. To lock-in, simply squeeze and insert into winch. All it takes is one hand. So you can spend less time fiddling around and more time sailing.

Lewmar OneTouch The Lewmar OneTouch Winch Handle is a new approach to winch handle design. Its patented 'OneTouch' mechanism allows you to squeeze the releaselever (which runs the entire length of the handle) and pull to unlock in one quick, easy motion. To lock-in, simply squeeze and insert into winch. All it takes is one hand. So you can spend less time fiddling around and more time sailing.

Lewmar OneTouch The Lewmar OneTouch Winch Handle is a new approach to winch handle design. Its patented 'OneTouch' mechanism allows you to squeeze the releaselever (which runs the entire length of the handle) and pull to unlock in one quick, easy motion. To lock-in, simply squeeze and insert into winch. All it takes is one hand. So you can spend less time fiddling around and more time sailing.

Lewmar OneTouch The award-winning OneTouch allows you to lock in and remove the winch handle with one hand. Simply squeeze the release lever, which runs the entire length of the handle, and pull to unlock in one quick and easy motion.   Release lever runs entire length of the handle – no twisting, jiggling or fiddling around Easy one-handed removal – just squeeze and lift Lightweight,...

Floating Winch Handle Barton floating winch handles feature a unique hollow moulded body with an integral moulded handle shaft. A bi-directional locking action operates from an easy to use thumb switch. Available in two sizes, float in fresh or salt water. NOTE: Floating winch handles are all tested to a load of 110 kgs and are intended for lightweight use only.

Floating Winch Handle Barton floating winch handles feature a unique hollow moulded body with an integral moulded handle shaft. A bi-directional locking action operates from an easy to use thumb switch. Available in two sizes, float in fresh or salt water. NOTE: Floating winch handles are all tested to a load of 110 kgs and are intended for lightweight use only.

Barton Winchers are a  specially designed rubber moulding which fits over the top of standard sheet winches converting them to self tailing. Easy to fit and available in four sizes to suit most winches. How they work: The simple operation works when the line is sheeted under load causing the coils to climb up the drum and are then gripped by the underside of the rubber body. When the sail...

Barton Winchers are a  specially designed rubber moulding which fits over the top of standard sheet winches converting them to self tailing. Easy to fit and available in four sizes to suit most winches. How they work: The simple operation works when the line is sheeted under load causing the coils to climb up the drum and are then gripped by the underside of the rubber body. When the sail...

Barton Winchers are a  specially designed rubber moulding which fits over the top of standard sheet winches converting them to self tailing. Easy to fit and available in four sizes to suit most winches. How they work: The simple operation works when the line is sheeted under load causing the coils to climb up the drum and are then gripped by the underside of the rubber body. When the sail...

Barton Winchers are a  specially designed rubber moulding which fits over the top of standard sheet winches converting them to self tailing. Easy to fit and available in four sizes to suit most winches. How they work: The simple operation works when the line is sheeted under load causing the coils to climb up the drum and are then gripped by the underside of the rubber body. When the sail...

Barton Winch Handle Pocket High quality holder manufactured from a hard wearing synthetic fabric. Will not sun degrade like moulded plastic versions.