Best Selling

The RNS-8 network switch is a premium 8 port Gigabit RayNet network switch with 4 dedicated power-over-ethernet (POE) ports. media only screen and (max-width: 768px) } 8 RayNet Ethernet gigabit ports for fast and reliable connectivity 4 dedicated Power-Over-Ethernet (POE) ports for powering cameras and remotes Rugged IPX6/IPX7 construction Reliable, waterproof RayNet connector Ethernet cable ports...

CPT-S plastic through hull 0 deg angled element CHIRP sonar transducer. Direct connect to CP100 and a68, a78, 98, 128, eS78, eS98, eS128 Multifunction Displays giving you CHIRP quality sonar 2D image.

CPT-S Plastic Conical High Chirp Through Hull 12 Degree Transducer

The CPT-S In-hull transducer provides a simple-to-install depth only transducer solution for non-cored fiberglass hulls. Ideal for sailing, cruising, and small powerboat applications, the CPTS-S In-hull transducer supports CHIRP operation centered on 200kHz. The CPT-S in-hull directly connects to Element S and connects to Axiom RV, Axiom Pro, and Element HV using the A80490 or A80559 adapters, respectively. An innovative transducer tube housing design allows the CPT-S In-Hull to mount in hulls ranging from 0 to 25 degrees deadrise.

Talamex Aqualine QLS230 is a superb slatted floor dinghy, quick and easy to inflate due to the double action hand pump supplied as standard allowing you to get out onto the water in no time and when you're finished they're speedy to pack away and stow on board. Thanks to its slatted floor, Talamex Aqualine QLS Inflatable Dinghy is lightweight and can be launched with ease. Key Features: 1100...

gS Video In and Alarm Out Cable 2m for gS95, gS125,gS165 and gS195 gS Series Glass Bridge Multifunction Displays

Plastic Thru-Hull 20° Angled Element CHIRP Sonar Transducer. 20° Element for 15-25° Deadrise Compatible with Axiom, a series and eS series (Sonar enabled models).  

Talamex Aqualine QLA270 is a superb air floor floor tender, quick and easy to inflate due to the double action hand pump supplied as standard allowing you to get out onto the water in no time and when you're finished they're speedy to pack away and stow on board. Thanks to its slatted floor, Talamex Aqualine QLA Inflatable Dinghy is lightweight and can be launched with ease. Key Features: 1100...

Depth Transducer with Retractable sensor and Blanking Plug

Flush fitting for long body Transducers.

Raymarine HV-300 Fairing Block

P120-ST800 Plastic Low Profile Thru Hull Speed and Temp Transducer

P319 Thru Hull Transducer

Compatible hull material: aluminium and fiberglass. Cable 9m (30ft) cable with connector. Hole diameter for installation: 2". Compatible with ST60+, ST40, ST290, ST70 - requires ST70 depth pod (sold separately).

Depth P66 Plastic Transm Mount

Compatible hull material: fiberglass. Max Power: 500W RMS (depending on connected SONAR). Frequency: 200/50 KHZ . Depth only. . Easily adjusts to any deadrise angle up to 22° . Transmits sound waves directly at the bottom so strong echoes are reflected back to the transducer . Can be removed in seconds for servicing or storage . Only the base piece is bonded to the hull. There is no adhesive layer under the transducer face to absorb sound energy . Simplifies in-hull installation .

235 kHz frequency prevents mutual interference with other echo sounders on the vessel. 6m (20’) NMEA 2000 cable DeviceNet connector. No holes to drill Installation can be done while the boat is in the water. Recommended for solid fiberglass hulls. Epoxies to aluminium hulls under 0.38 mm (0.150”) thick. Easily adapts to deadrise angles up to 22°. With SeaTalkNG Adapter.

Designed for inboard or outboard boats, the RV-212 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-212 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. 10° Element angle for Hull deadrises between 5° - 15°

Designed for inboard or outboard boats, the RV-320 Plastic Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. 20° Element angle for Hull deadrises between 15° - 25°

Designed for inboard or outboard boats, the RV-420 stainless steel through hull transducer system lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-420 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. 20° Element angle for Hull deadrises between 15° - 25°

RVM-400 series stainless steel all-in-one through hull transducer brings the power and clarity of RealVision MAX technology to inboard and outboard powerboats. The RVM-400 series transducers are compatible with the RVM1600 sonar module and Axiom 2 Pro RVM chartplotters. The RVM-420 is a port and starboard transducer pair designed for boats with 15° to 25° of deadrise. Each transducer element...

The R509 contains 25 internal ceramics to provide an unprecedented level of shallow and deep water sensitivity. Pairing this array of elements with the transducers maximum 3kW output and you truly have the best sport fishing transducer on the market.

Choose the R509LM for additional coverage in shallow water.

Raymarine’s RV-200 Bronze All-In-One Through Hull Transducer is designed for inboard and outboard powerboats. The RV-200 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-200 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. 0° Element angle for Hull deadrises between 0° - 5°