Talamex - Engine
Big Joe 12Ltr Fuel Tank
12Ltr strong but lightweight polyethylene fuel tank which is suitable for both petrol and diesel. The tank has an integral carrying handle and a built-in reserve section so there is always a drop of fuel to get you home.
Fuel fill cap with vent
8mm dia. Fuel line connection
L46cm (inc handle) x W26cm x H20cm
Big Joe 22Ltr Fuel Tank with Gauge
22Ltr strong but lightweight polyethylene fuel tank which is suitable for both petrol and diesel.
The tank has an integral carrying handle and a built-in reserve section so there is always a drop of fuel to get you home.
Fuel fill cap with vent
Gauge/Sight Glass
8mm dia. Fuel line connection
L53cm (inc handle) x W30cm x H26cm
Fuel Jerry Can with Pouring Spout - 5Ltr
Jerry Can with Pouring Spout - 5Ltr
Fuel Jerry Can manufactured in strong polythene plastic with flexible pouring spout.
For petrol/diesel
Size: 264 x 140 x 246
5Ltr Capacity
Fuel Jerry Can with Pouring Spout - 10Ltr
Jerry Can with Pouring Spout - 10Ltr
Fuel Jerry Can manufactured in strong polythene plastic with flexible pouring spout.
For petrol/diesel
Size:325 x 165 x 318
10Ltr Capacity
Fuel Jerry Can with Pouring Spout - 20Ltr
Jerry Can with Pouring Spout - 20Ltr
Fuel Jerry Can manufactured in strong polythene plastic with flexible pouring spout.
For petrol/diesel
Size: 389 x 213 x 388
20Ltr Capacity
Honda 3/8 Fuel Line Fitting
Fuel Line Fitting
Female fuel /Engine connector
Honda
Brass Engine Oil Sump Pump
Brass oil sump pump for extracting engine oil from inboard engines.
Simply run the engine for a short time to heat the oil, then turn off engine and insert the longer of the nylon tubes in to the engine dipstick hole.
The shorter length of nylon tube can dispense the used oil in to a separate container.
Gently pump to draw up the used oil in preparation for a complete oil change.
The oil pump is...
Talamex Engine Cut Out / Kill Switch Inboard/Outboard
Cut Out Switch
So called dead mans button. Safety switch for use on speedboats.
Rail Mount Outboard Storage Bracket
Plastic outboard storage bracket for mounting on 25mm dia. tube.
The bracket is supplied in 2 halves with vertical and horizontal openings allowing the bracket to be easily fitted to pushpit or pullpit rails.
Size: L165mm x W175mm
Talamex Outboard Motor Lock S/S
Outboard Lock
Stainless steel AISI 316 with cylinder lock and floating key ring. Size: 300 x 40 x 35mm.
Outboard Tiller Extension Handle - 60-120cm
Universal, telescopic outboard tiller extension, manufactuered in anodised aluminium to prevent corrosion with plastic grip.
Easily clamped to the outboard tiller by the clamp screw.
Adjustable Length: 61 - 102cm
Universal fitting
25mm/30mm dia.
Full Outboard Engine Cover - Small
Small Size Full Outboard Engine Cover
For engine sizes 2.5 to 10 Horsepower
Size: W 75 x H 125 X A 35 cm
Made of Alu coated Extra Strong 300 Denier polyester Fabric
Both UV Resistant & Water Resistant.
Available in 3 sizes
S: W 75 x H 125 x A 35 cm
M: W 87 x H 157 x...
Full Outboard Engine Cover - Medium
Medium Size Full Outboard Engine Cover
For engine sizes 8 to 70hp
Size: W 87 x H 157 X A 55 cm
Made of Alu coated Extra Strong 300 Denier polyester Fabric
Both UV Resistant & Water Resistant.
Available in 3 sizes
S: W 75 x H 125 x A 35 cm
M: W 87 x H 157 x...
Full Outboard Engine Cover - Large
Large Size Full Outboard Engine Cover
For engine sizes 70 to 150 Horsepower
Size: 125 W x 210 H x A 75 cm
Made of Alu coated Extra Strong 300 Denier polyester Fabric
Both UV Resistant & Water Resistant.
Available in 3 sizes
S: W 75 x H 125 x A 35 cm
M: W 87 x H 157 x...