Grid
List
Barton Marine Fixing Kit for Boom
Marine Fixing Kit for Boom Outhaul 10 Fitting Slugs
Barton Marine Laser Cunningham Ass
Laser Replica Cunningham assembly (98079) upgraded to Ball Bearing Blocks The Cunningham assembly comes with 8:1 purchase for those who find the standard system a struggle
Barton Marine Laser Outhaul Assemb
Laser Replica Outhaul assembly (98076) upgraded to Ball Bearing Blocks The outhaul assembly is class legal offering the same purchase as standard systems fitted
Barton Marine Laser Replica 15:1 K
Laser Replica 15:1 Kicking strap assembly (98075) upgraded to Ball Bearing blocks The kicking strap assembly gives all the advantages of systems costing twice the price
Barton Marine Laser Replica Cleat
Laser Replica Cleat base assembly (98078) upgraded to Ball Bearing Blocks The replica cleat mount comes fitted with two mini K Cams and our new pillar fairlead design for ease of adjustment from all angles
Barton Marine Laser Replica Mast B
Laser Replica Mast base assembly (98077) upgraded to Ball Bearing Blocks
Barton Marine Lightweight Lazy Jac
These all-rope kits still feature Barton's unique block covers but are intended for smaller yachts or lightweight use. Not recommended for large yachts or fully battened mains. We also recommend that the use of a topping lift is retained.
Barton Marine Mainsheet Traveller
Pre-packaged mainsheet systems with all components required in one complete kit – sliding bolt track, traveller, end fittings, plastic end caps, pilot track and full fitting instructions. Travellers, end fittings and track are manufactured from high quality marine grade aluminium with our unique grey anodised finish for added protection.
Barton Marine Pico Kicker Assembly
Marine Pico Kicker Assembly
Barton Marine Reefing Hook - Boom
The Reefing Hook is manufactured from stainless steel and used with slab reefing kits to secure the mainsail tack. Type 41517 is supplied in pairs and is intended for mounting either side of the boom at the gooseneck level.
Barton Marine Reefing Hook - Stemh
The Reefing Hook is manufactured from stainless steel and is used in conjunction with slab reefing kits for securing the mainsail tack. Type 41518 can be mounted above the gooseneck or used at the stemhead to accept a jib tack.
Barton Marine Removable Mainsheet
Marine Removable Mainsheet Track System Black, Size 2, 26mm Beam Track 1m length
Barton Marine Slab Reefing Kit up
The Slab Reefing Kit is supplied with sliding blocks which are held in place with spring-loaded plungers. Manufactured from stainless steel and Spectro anodised aluminium. Available in two sizes and complete with sufficient length of T-track and end stops. Supplied with 60cm of 25mm anodised T-track.
Barton Marine Slab Reefing Kit Upt
The Slab Reefing Kit is supplied with sliding blocks which are held in place with spring-loaded plungers. Manufactured from stainless steel and Spectro anodised aluminium. Available in two sizes and complete with sufficient length of track and end stops. Supplied with 100 cm of 32 mm anodised track.
Barton Marine Topper Downhaul Kit
The Topper Downhaul comes with a 6:1 purchase for those who find the standard system a struggle and for those wanting that extra grunt in the breeze. It is simple to fit and easy to use on both tacks thanks to the unique swivelling triple block fitted, ideal for club racing and training.
DISCLAIMER - This part is not International Topper Class legal and should not be used for official TopperClass...
Barton Skylock 400 Block Bundle
Skylock 400 Block Bundle
Barton Marine Rudder Gudgeon Strap
Strong and robust, the Rudder Gudgeon is manufactured from stainless steel with a tough nylon surround.
Barton Marine Rudder Pintle 19 mm
Strong and robust, the Rudder Pintle is manufactured from stainless steel with a tough nylon surround. Pintles are 9.5mm in diameter.
Barton Marine Rudder Pintle 22 mm
Strong and robust, the Rudder Pintle is manufactured from stainless steel with a tough nylon surround. Pintles are 9.5mm in diameter.
Barton Marine Rudder Pintle 35 mm
Strong and robust, the Rudder Pintle is manufactured from stainless steel with a tough nylon surround. Pintles are 9.5mm in diameter.
Barton Marine Rudder Pintle 50 mm
Strong and robust, the Rudder Pintle is manufactured from stainless steel with a tough nylon surround. Pintles are 9.5mm in diameter.
Barton Marine Transom Gudgeon
Manufactured from durable black nylon and marine-grade stainless steel.
Barton Marine Transom Pintle
Manufactured from durable black nylon and marine grade stainless steel.
Monel Rivets - Pack 6
Monel (nickel copper) alloy rivets.
Monel rivets are commonly found in aerospace, marine, and oil and gas production/refinery applications, as well as in high end musical instruments, among other uses.
Corrosion resistant for use with aluminium & stainless.
Suitable for marine applications.
Pack of 6
Barton Marine Dinghy Mast Support
The Dinghy Mast Support is designed to support the aft end of a dinghy mast when towing. Simply fits onto standard transom fittings and is instantly ready for use. Fully adjustable for different transom heights and features a removable pintle to accommodate different transom layouts. The yolk features a soft neoprene pad to protect the mast, shrouds and lines. Generous eyelets in the yolk allow for...
Barton Marine High Load Eye
The High Load Eye with loop is available in 3 sizes and can be used in various applications on board including Baber hauler, preventers, mast base block, tidies, emergency, occasional and toe rail blocks etc.
Barton Marine High Load Low Friction
The High Load Low Friction Eye/Ring with loop is available in 6 sizes and can be used in various applications on board including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks and toe rail blocks etc. The High Load Low Friction Eye/Ring combined with the Dyneema loop gives you a fast, efficient, simple and extremely strong solution to changing the direction of...
Plastic Hand Held Dinghy Bailer
Dinghy Hand Bailer
A simple plastic scoop bailer suitable for dingies and clearing the last drop of bilge water.
The bailer has a decent handle which to grab and flexible enough that it wont get broken easily.
L190 x W135mm
1 Litre
We suggest tying off with some cord to ensure it doesn't go missing.
Plastic Hand Held Dinghy Bailer Scoop
Dinghy Boat Hand Bailer
A heavy duty plastic scoop bailer suitable for dingies and clearing the last drop of bilge water.
The bailer has a decent handle which to grab and flexible enough that it wont get broken easily.
158x128x215mm
2.5 Litres
RWO 16mm Track End Stop Black Plastic (x4)
For 19mm stainless steel tracks. Slides, available with and without spring loaded positive plungers.
LIMITED END OF LINE STOCK AVAILABLE.
RWO Cleat 8mm Halyard Black 90mm Long (x2)
Halyard Cleats:
Self jamming cleat, suitable for halyards, control lines, down hauls etc. For ropes up to 8mm.
Length 90mm
Weight 6g
LIMITED END OF LINE STOCK AVAILABLE.
RWO R2064 – Bung Only For R2060
Bayonet white drain bung aperture 17mm diacut out 22mm, replacement bung for R2060
LIMITED END OF LINE STOCK AVAILABLE.
RWO R8370 – 10mm Thru Deck Low Friction Bush
R8370 – 10mm Thru Deck Low Friction Bush
Thru-deck low friction bush bore dia 10mm, hole dia 14mm, depth thru deck 8mm, weight 2.2gms, the PTFE coating seals each unit creating an extremely low friction surface. Friction is only increased by 15% compared to a plain bearing block. Up to 250% stronger, constructed from HE30 marine grade aluminium and anodised to 40 microns. Up to a 90% reduction...
RWO Spare Bung for 6-R2221 19mm (x2)
Bungs, All the choice you need for transom or buoyancy tank drains. Three types available, push-fit rubber bung version, a half turn bayonet and a screw thread + 'O' seal all with matching sockets. Both bayonet and screw bungs are fitted with a retainer to prevent loss. Spare bungs, are available separately.
LIMITED END OF LINE STOCK AVAILABLE.
Allen AL-0052 7mm Bullseye Fairlead (Pack of 2)
7mm Bullseye Fairleads are ideal for running ropes or wires around your boat, and feature impact and UV resistant material.
Pack of 2.
Allen AL-0452 11mm Bullseye Fairlead (Pack of 2)
Acetal open based and bullseye rope fairleads
Inside Diameter – 11mm
Fixing Hole Size – 3mm
Distance between fixing – 18mm
Weight – 4g
Allen AL-0153 7mm Low Profile Fairlead (Pack of 2)
This low profile 7mm Fairlead from Allen has been injection moulded with high-grade acetal, and comes supplied in packs of 2.
Allen AL-0099 Plastic Toe Strap Webbing Plate
Plastic fixing plates for toe strap webbing
Size 47mm Length
Grey or White
Supplied as a pair
Clamcleat CL203 Junior Rope Cleat
Clamcleat Junior CL203 rope cleat with fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Black plastic
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat CL209 Midi Rope Cleat
Clamcleat Midi CL209 rope cleat without fairlead suitable for most dinghy applications.
Suitable for 4-8mm dia. rope
Black plastic
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat CL205 Major Rope Cleat
Clamcleat Major CL205 rope cleat without fairlead suitable for most dinghy and dayboat applications.
Suitable for 10-16mm dia. rope
Black plastic
Fixings: 2 x No.14csk screws - 5/16 rivets - M8 csk set bolt
Clamcleat C211 MK2 Racing Junior Rope Cleat
Clamcleat Racing Junior CL211 MK2 rope cleat with fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat C217 M1 Starboard Side Entry
Clamcleat Junior CL217 rope cleat with side entry fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Side entry fairlead allows ropes to be hooked in for cleating, yet easily removed
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat 3-6mm Side Starboard Hard Anodised Grey Mk2
Clamcleat Junior CL217 MK2A rope cleat with side entry fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Side entry fairlead allows ropes to be hooked in for cleating, yet easily removed
Hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat C218M1 Port Side Entry
Clamcleat Junior CL218 rope cleat with side entry fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Side entry fairlead allows ropes to be hooked in for cleating, yet easily removed
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat C236 MK1 Racing Rope Cleat with Roller
Clamcleat Junior CL236 MK1 Racing rope cleat with top roller suitable for most dinghy applications. The top roller allows ropes to enter the cleat from above and is also ideal for sun umbrellas, shades and sun sails.
Suitable for 3-6mm dia. rope
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat C253 Trapeze & Vang Rope Cleat
Clamcleat CL253 trapeze and vang rope cleat with roller suitable for most dinghy applications.
Suitable for 4-8mm dia. rope
Dinghy trapeze line adjustment
Vangs & Kicking strap adjustment
Supplied with a black Link (PTLINK). This makes releasing the rope a lot easier
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat CL215 Midi Side Fixing Rope Cleat
Clamcleat Side Fixing Midi CL215 rope cleat without fairlead suitable for most dinghy applications.
Suitable for 4-8mm dia. rope
Black plastic
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
