Vetus - Engine

NLP40 Waterlock To compliment the well known and proven range of LP waterlocks, VETUS has now introduced several new models, type NLP, made of injection-moulded plastic materials. These have the benefits of being durable, corrosion proof and light in weight. The new NLP waterlocks are of dual stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube...

NLP45 Waterlock To compliment the well known and proven range of LP waterlocks, VETUS has now introduced several new models, type NLP, made of injection-moulded plastic materials. These have the benefits of being durable, corrosion proof and light in weight. The new NLP waterlocks are of dual stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube...

NLP50 Waterlock To compliment the well known and proven range of LP waterlocks, VETUS has now introduced several new models, type NLP, made of injection-moulded plastic materials. These have the benefits of being durable, corrosion proof and light in weight. The new NLP waterlocks are of dual stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube...

Vetus Exhaust Gooseneck Gooseneck for exhaust hose with 40 - 45 - 51 mm internal diameter. Raises the exhaust hose above the waterline so that water cannot backfill the exhaust system.

Anti-Syphon Vent Vetus Air vent suitable for hoses of Ø 1/2', 3/4', 1' and 1-1/4' I.D. If the point of injection of the cooling water is situated at a height less than 6' above the water line, then when the engine is stopped there is a risk that, as a result of syphoning, the cooling water may enter the engine. Such syphoning may be avoided by positioning a VETUS air vent into the cooling...

Engine Mount Vetus TYPE K engine mounts are for smaller engines, up to approx. 60 kW (8O HP).  The torque of an engine is one of the deciding factors for determination of the load applied to the Vetus engine mounts.  When more powerful engines are installed, it is important to use the following formula to define the load per support in kg (4 supporting points). Engine weight in kg + kW...

Engine Mount Vetus TYPE K engine mounts are for smaller engines, up to approx. 60 kW (8O HP). The torque of an engine is one of the deciding factors for determination of the load applied to the Vetus engine mounts.  When more powerful engines are installed, it is important to use the following formula to define the load per support in kg (4 supporting points). Engine weight in kg + kW x 487...

Engine Mount Vetus TYPE K engine mounts are for smaller engines, up to approx. 60 kW (8O HP). The torque of an engine is one of the deciding factors for determination of the load applied to the Vetus engine mounts. When more powerful engines are installed, it is important to use the following formula to define the load per support in kg (4 supporting points). Engine weight in kg + kW x 487 x reduction...

Vetus TRC40PV 40mm Vetus TRC transom exhaust connection with check valve The exhaust hose can be fitted directly to this transom connection using heavy duty stainless hose clamps. (Hose Clamp Item No 18-3110)

Vetus TRC45PV 45mm Vetus TRC transom exhaust connection with check valve The exhaust hose can be fitted directly to this transom connection using heavy duty stainless hose clamps. (Hose Clamp Item No 18-3111)

Vetus TRC50PV 50mm Vetus TRC transom exhaust connection with check valve The exhaust hose can be fitted directly to this transom connection using heavy duty stainless hose clamps. (Hose Clamp Item No 18-3112)

Water Seperator/Fuel Filter The WS180 is suitable for petrol & diesel. Connections:M14 x 1.5 female thread Capacity:180L/Hour Weight: 0.7kg Size: H207 x D85mm

 VETUS bow thruster with 25 kgf thrust force, suitable for boats from 5,5 to 8,5 metres in length. 12 Volt DC version. Advantages of VETUS bow thrusters A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimises cavitation noise Spiral gears minimise transmission noise The use of a flexible coupling between tail piece and motor eliminates...

VETUS bow thruster with 35 kgf thrust force, suitable for boats from 6,5 to 10 metres in length. 12 Volt DC version. Advantages of VETUS bow thrusters A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimises cavitation noise Spiral gears minimise transmission noise The use of a flexible coupling between tail piece and motor eliminates vibration All...

 VETUS bow thruster with 55 kgf thrust force, suitable for boats from 8,5 to 12,5 metres in length. 12 Volt DC version. Advantages of VETUS bow thrusters A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimises cavitation noise Spiral gears minimise transmission noise The use of a flexible coupling between tail piece and motor eliminates...

Vetus bow thruster tunnels are available available in glassfibre reinforced polyester, steel or aluminium, In lengths of 0.75m 1m 1.5m 2m  3m Outer diameters vary depending on material, but are usually around 10mm greater than the internal diameter.

Vetus High quality 1m GRP Tunnels tunnel with diameter 150mm - suitable for BOW35 & 55 thrusters. 

A VETUS stern thruster, in combination with a VETUS bow thruster will provide even greater manoeuvrability of your boat in locks or harbours.The availability of a side-directional thruster in the bow and another side-directional thruster at the transom makes mooring, sailing away and finding the right spot in the lock or the marina child’s play. The effects of wind and current can be effectively...

Vetus Bow/Stern Thruster Panel connection cable for bow thrusters, fitted with multi-plugs. Available in 6m, 10m, 16m, 18m or 20m lengths.

Vetus Bow/Stern Thruster Panel connection cable for bow thrusters, fitted with multi-plugs. Available in 6m, 10m, 16m, 18m or 20m lengths.

Vetus Bow/Stern Thruster Panel connection cable for bow thrusters, fitted with multi-plugs. Available in 6m, 10m, 16m, 18m or 20m lengths.

Vetus Joystick This joystick panel is suitable for controlling one bow thruster or stern thruster  Additional Features Built in Time lapse device when reversing direction or rotation Automatic switch off after 30 minutes inactivity Thruster switches off aftger continuous running for more than 2 minutes Panel resets itself after 5 seconds  

Fuse Holder Suitable for VETUS fuses of 40-50-63-80-100-125-160-200-250-300-355-425 and 500 Amp. The fuses to match are of the so-called “slow blow” type.They are encapsulated in glass, so as to prevent fire.  Fuse holder suplied with a protective cover. For use with Vetus ZE fuses.(FUSE NOT SUPPLIED)

Vetus ZE Fuses Vetus Slow-blow fuses, encapsulated in glass so as to prevent fire. Suitable for bow thrusters, windlasses etc..  ZE125 For 25kgf Thruster ZE160 For 35KGF Thruster ZE250 For 55kgf Thruster

Vetus Zinc anode for Vetus BOW2512

Vetus Zinc anode for Vetus BOW35/55

Vetus Vetus anode for BOW60/75/80/95

Vetus Zinc anode for Vetus BOW125/130/160

Vetus Zinc anode for Vetus  BOW23A/50/80 + sterndrive